|
|
You are here:
Products » Accessories » Mechanical actuators
|
For safety switches and safety systems with separate actuator, EUCHNER offers a wide range of related actuators. Practical for every application, whether large or small hinged doors, flaps or sliding doors, as a result the optimum solution can be found quickly. Almost all actuators are supplied with safety screws. The safety screws included can be inserted with a normal tool, but cannot be removed again. Unscrewing the actuator is prevented and tampering with the safety guard is made more difficult. Tip! To see which actuator can be combined with which safety switch, you should first select the required safety switch and then consult the possible combinations in the related accessories section! |  |  | more information |
Straight / bent actuator- Use on sliding doors or hinged doors with larger radius
- Actuator with rubber bush for elastic mounting
- Minor misalignment of the door can be compensated
- The safety screws included can be inserted with a normal tool, but cannot be removed again
- Unscrewing of the actuator is prevented
Hinged actuator- Use on hinged doors and safety flaps with smaller radius
- Due to the spring movement of the actuator, jamming in the switch head is prevented
- The safety screws included can be inserted with a normal tool, but cannot be removed again
- Unscrewing of the actuator is prevented
Actuator with increased overtravel- The actuator overtravel is the property of the actuator to move in the actuating head without changing the state of the switching element
- Overtravel actuators have increased overtravel compared to standard actuators
- Usage with imprecise door guide, vibration, rubber seals
- For the usage of insertion funnels (except safety switch NM.VZ)
Insertion funnel- Imprecisely positioned or misaligned actuators are reliably guided into the switch head by the funnel
- The switch head is protected against damage
- Can only be used with overtravel actuators!
|
Operating Principle: Mechanical Switch  | Actuator S for safety switches SGP/STA/STP/STM |
- Two stainless safety screws per actuator
- Actuator with rubber bush
NoteType S actuators must not be used in conjunction with insertion funnels. L actuators must be used for insertion funnels. Straight actuatorSuitable for a maximum tensile force of 3000 N The straight actuator is used on sliding doors or hinged doors with door radii greater than 300 mm. Safety screws prevent unscrewing of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 095 738 ACTUATOR S-GT-SN
- 097 861 ACTUATOR S-G-SN-C2115
| Standard actuator S, straight (dimensionally compatible with TP actuator P-G) Without rubber bush, overtravel 5 mm Standard actuator S, straight With rubber bush, overtravel 5 mm |
 | Actuator S, bent, for safety switch SGP/STA/STP/STM |
- Two stainless safety screws per actuator
- Actuators with rubber bush
NoteType S actuators must not be used in conjunction with insertion funnels. L actuators must be used for insertion funnels. Bent actuatorSuitable for a maximum tensile force of 1500 N Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Standard actuator S, bent With rubber bush, overtravel 5 mm |
 | Actuator L, bent, for safety switch SGP/STA/STP/STM for insertion funnel |
- Two stainless safety screws per actuator
- Actuators with rubber bush
NoteType S actuators must not be used in conjunction with insertion funnels. L actuators must be used for insertion funnels. Bent actuatorSuitable for a maximum tensile force of 1500 N Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Actuator L, bent, for insertion funnel With rubber bush, overtravel 5 mm |
 | Actuator L for safety switches SGP/STA/STP/STM for insertion funnel |
- Two stainless safety screws per actuator
- Actuator with rubber bush
NoteType S actuators must not be used in conjunction with insertion funnels. L actuators must be used for insertion funnels. Straight actuatorSuitable for a maximum tensile force of 3000 N The straight actuator is used on sliding doors or hinged doors with door radii greater than 300 mm. Safety screws prevent unscrewing of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Actuator L, straight, for insertion funnel With rubber bush, overtravel 5 mm |
 | Hinged actuator S top/bottom for safety switches SGP/STA/STP/STM |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For top and bottom hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 095 315 HINGED ACTUATOR-S-OU-SN
| Hinged actuator S-OU-SN Radius ≥ 200 mm, safety guard hinged at top/bottom, overtravel 5 mm |
 | Hinged actuator S left/right for safety switches SGP/STA/STP/STM |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For right and left hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 096 838 HINGED ACTUATOR-S-LR-SN
| Hinged actuator S-LR-SN Radius ≥ 100 mm, safety guard hinged on left/right, overtravel 5 mm |
 | Hinged actuator L top/bottom for safety switches SGP/STA/STP/STM for insertion funnel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For top and bottom hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 096 697 HINGED ACTUATOR-S-OU-LN
| Hinged actuator S-OU-LN for insertion funnel Radius ≥ 200 mm, safety guard hinged at top/bottom, overtravel 5 mm |
 | Hinged actuator L left/right for safety switch SGP/STA/STP/STM for insertion funnel |
- Actuators made of stainless steel
- Two stainless safety screws per actuator
- For right and left hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 096 844 HINGED ACTUATOR-S-LR-LN
| Hinged actuator S-LR-LN for insertion funnel Radius ≥ 200 mm, safety guard hinged on left/right, overtravel 5 mm |
 | Actuators for safety switches NZ.VZ, NZ.VZ.VS and TZ |
- Two stainless safety screws per actuator
- Packaging unit 25 pieces optional
Straight actuatorThe straight actuator is used on sliding doors or hinged doors with door radii greater than 1000 mm. Safety screws prevent unscrewing of the actuator. The safety screws included can be inserted with a normal tool, but cannot be removed again. Actuator with overtravel| 4 mm | for doors with normal play | | 16 mm | for doors with large play (optional) |
Order numbers:- 016 849 ACTUATOR-Z-G
- 072 251 ACTUATOR-Z-GN
- 074 411 ACTUATOR-Z-G/V25
- 097 436 ACTUATOR-Z-GME
| Actuator Z-G straight Overtravel 4 mm Actuator Z-GME straight Overtravel 4 mm, solid stainless steel Actuator Z-GN straight Overtravel 16 mm |
 | Hinged actuators left/right for safety switches NZ.VZ, NZ.VZ.VS and TZ |
- Two stainless safety screws per actuator
- Smaller door radii optional
- Packaging unit 25 pieces optional
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 024 298 HINGED ACTUATOR-Z-L
- 024 299 HINGED ACTUATOR-Z-R
- 074 412 HINGED ACTUATOR-Z-R/V25
- 074 413 HINGED ACTUATOR-Z-L/V25
- 100 406 HINGED ACTUATOR-Z-R-C2194
- 100 407 HINGED ACTUATOR-Z-L-C2194
| Hinged actuator Z-R/Z-LL Radius ≥ 400 mm, safety guard hinged on left/right Hinged actuator Z-R-C2194/Z-L-C2194 Radius ≥ 200 mm, safety guard hinged on left/right |
 | Hinged actuator top/bottom for safety switches NZ.VZ, NZ.VZ.VS and TZ |
- Two stainless safety screws per actuator
- Smaller door radii optional
- Packaging unit 25 pieces optional
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 048 850 HINGED ACTUATOR-Z-U
- 057 950 HINGED ACTUATOR-Z-O
- 074 414 HINGED ACTUATOR-Z-U/V25
- 074 415 HINGED ACTUATOR-Z-O/V25
| Hinged actuator Z-U/Z-O Radius ≥ 165 mm, safety guard hinged at bottom/top |
 | Actuator for safety switches NX/TX |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- With rubber bush
Straight actuatorThe straight actuator is used on sliding doors or hinged doors with door radii greater than 300 mm. Safety screws prevent unscrewing of the actuator. Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Actuator X-GQ straight Rubber bush, overtravel 2 mm |
 | Bent actuator for safety switches NX/TX |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- With rubber bush
Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Actuator X-WQ bent Rubber bush, overtravel 2 mm |
 | Actuator for safety switches NX/TX, increased overtravel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- With rubber bush
Straight actuatorThe straight actuator is used on sliding doors or hinged doors with door radii greater than 300 mm. Safety screws prevent unscrewing of the actuator. Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Actuator X-GNQ straight Rubber bush, overtravel 7 mm |
 | Bend actuator for safety switches NX/TX, increased overtravel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- With rubber bush
Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers: | Actuator X-WNQ bent Rubber bush, overtravel 7 mm |
 | Hinged actuator left/right for safety switch NX/TX |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- With rubber bush
Hinged actuatorFor door radii less than 300 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 098 082 HINGED ACTUATOR-X-LR-N
| Hinged actuator X-LR-N Radius ≥ 100 mm, safety guard hinged on right/left |
 | Hinged actuator top/bottom for safety switch NX/TX |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- With rubber bush
Hinged actuatorFor door radii less than 300 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 097 906 HINGED ACTUATOR-X-OU-N
| Hinged actuator X-OU-N Radius ≥ 100 mm, safety guard hinged at bottom/top |
 | Actuator for safety switches NM.VZ |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- Actuator with optional rubber bush
- Narrow design optional
Straight actuatorThe straight actuator is used on sliding doors or hinged doors with door radii greater than 150 mm. Safety screws prevent unscrewing of the actuator. Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 074 076 ACTUATOR-M-G
- 074 077 ACTUATOR-M-W
- 074 078 ACTUATOR-M-GT
- 074 079 ACTUATOR-M-GQ
- 074 080 ACTUATOR-M-WT
- 074 128 ACTUATOR-M-GS
- 074 129 ACTUATOR-M-WS
- 074 130 ACTUATOR-M-GTS
| Actuator M-G straight Overtravel 4 mm Actuator M-W bent Overtravel 4 mm Actuator M-GT straight Longitudinal rubber bush, overtravel 4 mm Actuator M-GQ straight Transverse rubber bush, overtravel 4 mm Actuator M-WT bent Rubber bush, overtravel 4 mm Actuator M-GS straight Narrow, overtravel 4 mm Actuator M-WS bent Narrow, overtravel 4 mm Actuator M-GTS straight Rubber bush, narrow, overtravel 4 mm |
 | Actuator for safety switches NP/GP/TP |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- Actuator with optional rubber bush
Straight actuatorThe straight actuator is used on sliding doors or hinged doors with door radii greater than 1000 mm. Safety screws prevent unscrewing of the actuator. Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 059 226 ACTUATOR-P-G
- 070 046 ACTUATOR-P-GT
| Actuator P-G straight Overtravel 2 mm Actuator P-GT straight Rubber bush, overtravel 2 mm |
 | Bent actuator for safety switches NP/GP/TP |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- Actuator with optional rubber bush
Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 059 227 ACTUATOR-P-W
- 070 038 ACTUATOR-P-WT
| Actuator P-W bent Overtravel 2 mm Actuator P-WT bent Rubber bush, overtravel 2 mm |
 | Actuator for safety switch NP/GP/TP, increased overtravel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- Actuator with optional rubber bush
Straight actuatorThe straight actuator is used on sliding doors or hinged doors with door radii greater than 1000 mm. Safety screws prevent unscrewing of the actuator. Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 074 570 ACTUATOR-P-GN
- 074 576 ACTUATOR-P-GNT
| Actuator P-GN straight Overtravel 7 mm Actuator P-GNT straight Rubber bush, overtravel 7 mm |
 | Bent actuator for safety switches NP/GP/TP, increased overtravel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- Actuator with optional rubber bush
Actuator with rubber bushFor flexible mounting of the actuator. Screws made of stainless steelThe safety screws included can be inserted with a normal tool, but cannot be removed again. Order numbers:- 074 571 ACTUATOR-P-WN
- 074 577 ACTUATOR-P-WNT
| Actuator P-WN bent Overtravel 7 mm Actuator P-WNT bent Rubber bush, overtravel 7 mm |
 | Hinged actuator top/bottom for safety switches NP/GP/TP |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For top and bottom hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 070 050 HINGED ACTUATOR P-OU
| Hinged actuator P-OU Safety guard hinged at top/bottom, overtravel 2 mm |
 | Hinged actuator left/right for safety switches NP/GP/TP |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For right and left hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 059 440 HINGED ACTUATOR P-LR
| Hinged actuator P-LR Safety guard hinged on left/right, overtravel 2 mm |
 | Hinged actuator top/bottom for safety switches NP/GP/TP, increased overtravel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For top and bottom hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 074 572 HINGED ACTUATOR P-OUN
| Hinged actuator P-OUN Safety guard hinged at top/bottom, overtravel 7 mm |
 | Hinged actuator left/right for safety switch NP/GP/TP, increased overtravel |
- Actuator made of stainless steel
- Two stainless safety screws per actuator
- For right and left hinged doors
Hinged actuatorFor door radii less than 1000 mm a hinged actuator should be used. The spring action movement of the actuator prevents damage due to the actuator jamming in the actuating head. Depending on the movement of the safety guard, the actuator must be selected for left/right or top/bottom. Order numbers:- 074 573 HINGED ACTUATOR P-LRN
| Hinged actuator P-LRN Safety guard hinged on left/right, overtravel 7 mm |
 | Actuator for safety switch NQ/TQ |
- With rubber bush
- Minimum door radius 160 mm
- Maximum locking force 500 N
- Assembly aid included
Order numbers:- 103 386 ACTUATOR-Q-GT
- 103 389 ACTUATOR-Q-WT
- 103 390 ACTUATOR-Q-WTB
| Actuator Q-GT straight Maximum locking force 500 N Actuator Q-WT bent Maximum locking force 100 N Actuator Q-WTB bent Mounting plate, maximum locking force 500 N |
 | Hinged actuator right/top for safety switch NQ/TQ |
- Minimum door radius 50 mm
- For doors hinged on right and at the top
- Maximum locking force 500 N
- Assembly aid included
Order numbers:- 103 387 HINGED ACTUATOR Q-RO
| |
 | Hinged actuator left/bottom for safety switch NQ/TQ |
- Minimum door radius 50 mm
- For left and bottom hinged doors
- Maximum locking force 500 N
- Assembly aid included
Order numbers:- 103 388 HINGED ACTUATOR Q-LU
| |
Click on the product to view the available accessories! Operating Principle: Mechanical Switch  | Hinged actuator S top/bottom for safety switches SGP/STA/STP/STM |
Fastening - Mounting plates EMP-B1 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator S left/right for safety switches SGP/STA/STP/STM |
Fastening - Mounting plates EMP-B2 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator L top/bottom for safety switches SGP/STA/STP/STM for insertion funnel |
Fastening - Mounting plates EMP-B1 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator L left/right for safety switch SGP/STA/STP/STM for insertion funnel |
Fastening - Mounting plates EMP-B2 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator top/bottom for safety switches NP/GP/TP |
Fastening - Mounting plates EMP-B2 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator left/right for safety switches NP/GP/TP |
Fastening - Mounting plates EMP-B1 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator top/bottom for safety switches NP/GP/TP, increased overtravel |
Fastening - Mounting plates EMP-B2 for actuators for safety switches TP...A, STA, STP, TX and TZ
 | Hinged actuator left/right for safety switch NP/GP/TP, increased overtravel |
Fastening - Mounting plates EMP-B1 for actuators for safety switches TP...A, STA, STP, TX and TZ
|
|
|
|
|
Technical Support
|
|
|
|
|
|
|
|
|