Read/write head CIT3A G05 with serial interface
The individual commands for reading and writing the data carriers are in accordance with the common 3964R protocol and are described in the EUCHNER CIS3 system manual (order no. 071 652). For data carrier programming away from the system, a convenient WINDOWS-compatible PC software application is available (Software Transponder Coding).
The size of the robust housing in degree of protection IP65 is compliant with the standard EN 50041. The division into 3 assemblies permits easy installation and straightforward replacement.
On the use of a screened cable, the connecting cable for the serial interface is allowed to be max. 5 m long.
|2||LED status indication|
Mechanical values and environment
|Ambient temperature||0 ... 55 °C|
|Degree of protection||IP65|
|Cable length||max.5 m RS232|
Electrical connection ratings
|Operating voltage DC||20 ... 24 ... 28 V DC (All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)|
|Current consumption||max.140 mA|
|Yellow||Data carrier in operating distance|
|Data protocol||3964R via RS232 8 data bits, even parity|
|Data rate||9,6 kbit/s|
In combination with Data carrier CIS3AP50X50SH16YSNOU, CIS3AP50X50SH16YSNOP
|At 25°C, center offset m=0mm||0 ... 20 ... 28 mm|
|At 25°C, read distance s=20mm||-13 ... 13 mm|
Download all important documents with a single click.
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
|Customs tariff number||85389099|