STA3A-2131A024L024BHA10C2398 (Order no. 119366)
Safety switch STA, plug connector BHA (MR10), contacts for the door position, escape release
- Plug connector BHA (MR10)
- Contacts for the door position
- Auxiliary release
- Escape release, long
- LED indicator
- Closed-circuit current principle

Description
Approach direction

Horizontal and vertical
Can be adjusted in 90° steps
Increased overtravel for horizontal approach direction
If increased play is required when the door is closed, an actuator with overtravel is available. With this actuator the door can move slightly in the actuating direction when closed. This is important, for example, if safety doors have a rubber end stop. Using an actuator with overtravel, the continuous pressure from the compressed rubber can be reduced. In this way the load is reduced on the switch head and the door mechanism.
LED indicator
The switch has two freely assignable LED indicators (red and green).
Guard locking principle
Power to unlock: On a guard with guard locking based on the closed-circuit current principle, the guard is locked by spring force until the guard locking solenoid is supplied with power. Unlocking is by solenoid force. The term mechanical guard locking is also used.
Switching element
2131 | Slow-action switching contact |
Contacts for guard locking: 2 positively driven contacts | |
Contacts for door monitoring: 1 NC contact |
Auxiliary release
The auxiliary release on the front makes it possible to access the machine if there is a malfunction, e.g. a power failure. Unlocking is performed using a tool or a key. The auxiliary release must be protected against misuse (sealing, lacquer).
Escape release
This is used for manual release of guard locking from the danger zone without tools.
Accessories required
Actuator is not included.




Functional drawings

Dimensional drawings

1 | Escape release, basic position |
10 | Actuating direction: After the fixing screws are unscrewed, the actuating head can be changed to the required approach direction. |
2 | Escape release, unlocked position |
3 | Safety switch and actuator must be placed together for mounting on the machine. Do not use actuating head as an end stop. |
4 | Auxiliary release |
5 | Locking screw |
6 | Built-in connector: MIN-10MR-1-18-M20 not aligned |
7 | Always install the escape release lever on the recessed side |
8 | Establish a positive connection between the shaft and lever |
9 | Order actuator separately |
Connection examples

Technical data
Approvals




Electrical connection values
Fuse | max. 4 A gG |
Power consumption | 8 W |
Display module | 24 V -15% ... +10% |
Rated insulation voltage Ui | 50 V |
Rated impulse voltage Uimp | 2.5 kV |
Utilization category | |
DC-13 | 4 A 24 V |
AC-15 | 4 A 50 V |
Solenoid operating voltage | |
AC/DC | 24 V -15% ... +10% |
Solenoid duty cycle | 100 % |
Switching voltage | |
min. at 10 mA | 12 V |
Switching current | |
min. at 24 V | 1 mA |
thermal rated current Ith | 4 A |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | A |
Connection type | |
1 x | Built-in connector BHA10 (9-pin + PE) |
Number of door position NC contacts | 1 |
Number of guard lock monitoring NO contacts | 1 |
Number of guard lock monitoring positively driven contacts | 2 |
Extraction force | 30 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 35 N |
Installation orientation | any |
Insertion depth | 24.5 mm |
Mechanical life | 1 x 10⁶ |
Retention force | 20 N |
Switching principle | Slow-action switching contact |
Degree of protection | IP65 |
Ambient temperature | -20 ... 70 °C |
Material | |
Housing | Alloy - die-cast |
Contact | Silver alloy, gold flashed |
Locking force Fmax | 3000 N |
Locking force FZh | 2300 N |
Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of guard locking | 1.15x107 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
PL | Maximum SIL | Category | Mission time | |
---|---|---|---|---|
Control of guard locking | Depending on external control of guard locking | 20 y |
Miscellaneous
C number | |
C2398 | Special wiring, escape release long |
In combination with actuator ACTUATOR-S-GT-SN
Overtravel | 5 mm |
Accessories
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Fiche technique
Ficha de datos
Datenblatt
Ficha de dados
数据表
データ シート
데이터 시트
Datový list
Fiche technique
Ficha de datos
Datenblatt
Ficha de dados
数据表
データ シート
데이터 시트
Datový list

Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità

Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità








Other Documents


CAD data
Ordering data
Ordernumber | 119366 |
Item designation | STA3A-2131A024L024BHA10C2398 |
Gross weight | 0,78kg |
Customs tariff number | 85365019000 |
ECLASS | 27-27-26-03 Safety switch with guard control |