EUCHNER – More than safety.
EUCHNER – More than safety.
 

CET-L1AH-AP-U-167423 (Order no. 167423)

Technical data

Actuator CET-A-BWK-50X (Order no. 096327)

Actuator CET-A-BWK-50X (Order no. 096327)

Electrical connection values

Power supply Inductive via read head

Mechanical values and environment

Approach direction Any
Installation orientation any (Active face opposite read head)
Mechanical life 2 x 10⁶
Degree of protection IP67 (Degree of protection of the transponder)
Ambient temperature -20 ... +55 °C
Material stainless steel
Locking force Fmax 6500 N
Locking force FZh 5000 N

RIEGEL CET-A-C (Order no. 104309)

RIEGEL CET-A-C (Order no. 104309)

Mechanical values and environment

Approach direction A or C
Number of safety switches that can be mounted 1
Escape release none
Material
Handle Plastic
Switch bracket Steel powder-coated
Base plate Galvanized steel
Guide strips Plastic

Miscellaneous

Detent mechanism none

Switch CET3-AP-CRA-AH-50X-SI-111346 (Order no. 111346)

Switch CET3-AP-CRA-AH-50X-SI-111346 (Order no. 111346)

Workspace

Repeat accuracy R
according to EN 60947-5-2 10 %

Electrical connection values

Fuse
external (operating voltage UB) 0.25 ... 8 A
external (solenoid operating voltage UCM) 0.5 ... 8 A
Power consumption
Solenoid 11 W
Connecting cable 30V DC, 2A (for UL requirement UL category code (CYJV/CYJV7))
Operating voltage DC
UB 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
LED 24 V DC -15% V DC ... +10% V DC
EMC protection requirements Acc. to EN IEC 60947-5-3
Utilization category
DC-13 24 V 200 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Solenoid operating voltage DC
UCM 24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV
Solenoid duty cycle 100 %
Risk time according to EN 60947-5-3 max. 400 ms
Switching load
according to UL 24V DC, Class 2 (For alternatives, see operating instructions)
Safety class
EN IEC 61140 III
Current consumption
IB 80 mA
ICM 450 mA
Test pulse duration max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm)
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Approach speed max. 20 m/min
Connection type 2 plug connector M12, 5-pin
Ready delay 1 s
Installation orientation any (preferably head downward)
Switching frequency max. 0.5 Hz
Degree of freedom X ±5 mm
Degree of freedom Y ±5 mm
Degree of freedom Z ±4 mm
Mechanical life 2 x 10⁶
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP67 (screwed tight plug connector/mating component)
Ambient temperature
at UB = 24 V DC -20 ... +55 °C
Material
Safety switch housing Die-cast aluminum
Ramp Stainless steel
Locking force Fmax 6500 N
Locking force FZh 5000 N
Guard locking principle Closed-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Mission time 20 y
Control of guard locking
Category Depending on external control of guard locking
Performance Level Depending on external control of guard locking
PFHD Depending on external control of guard locking
Monitoring of guard locking and the guard position
Category
Any installation orientation 4
Performance Level PL e
PFHD
Any installation orientation 3.1 x 10-9

Miscellaneous

The following applies to the approval according to UL Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Components

CET-A-BWK-50X
096327
CET-A-BWK-50X
Actuator CET-A-BWK-50X
  • Actuator for read head/safety switch CET
  • Transponder coding
  • Four safety screws M5x16 included
RIEGEL CET-A-C
104309
RIEGEL CET-A-C
Bolt for safety switch CET
  • Bolt for switch family CET
  • Steel bolt
  • For doors hinged on the left or right
  • With door stop
  • Suitable for a door gap of approx. 15 mm
CET3-AP-CRA-AH-50X-SI-111346
111346
CET3-AP-CRA-AH-50X-SI-111346
Non-contact safety switch CET-AP-..., for connection to decentralized peripheral systems
  • Safety switch with guard locking and integrated evaluation electronics
  • Locking force up to 6500 N
  • Direct connection to decentralized peripheral systems (e.g. ET200pro)
  • Short circuit monitoring
  • 2 safety outputs (semiconductor outputs)
  • Category 4 / PL e according to EN ISO 13849-1
  • With 2 plug connectors M12
  • Unicode
  • Indication of the door position by LED
  • Approach direction A (delivery state)

Downloads

Complete package

Download all important documents with a single click.

Content:

  • The operating instructions and any additions to the operating instructions or brief instructions
  • Any data sheets to supplement the operating instructions
  • The declaration of conformity
Download Complete Package (ZIP, 9,4 MB)

Ordering data

Ordernumber 167423
Item designation CET-L1AH-AP-U-167423
Gross weight 4,9kg
Customs tariff number 83014090
ECLASS 27-27-24-05 Safety-related transponder switch with guardlocking

Technical support

Technical support
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER (UK) Ltd.
+44 114 2560123
sales(at)euchner.co.uk

EUCHNER USA Inc.
+1 315 701-0315
info(at)euchner-usa.com