EUCHNER – More than safety.
EUCHNER – More than safety.
HomeProductsSafety engineering with AS‑InterfaceTransponder-coded safety switches with AS-Interface

CET4-AS-CRA-CB-50X-1-116515 (Order no. 116515)

Safety switch CET-AS – with AS-i connection, plug connector M12 (open-circuit current principle)

  • Safety switch with guard locking and integrated evaluation electronics
  • Locking force up to 6500 N
  • Category 4 / PL e according to EN ISO 13849-1
  • Multicode
  • Approach direction A (delivery state)
CET4-AS-CRA-CB-50X-1-116515 (Order no. 116515)

Description

Approach direction

Horizontal

Can be adjusted in 90° steps

Guard locking type

CET4

Open-circuit current principle. Guard locking by control of AS-i output 0. Release by spring force.

Control of the guard locking solenoid

The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0.

AS-Interface inputs

D0, D1

Door monitoring

D2, D3

Guard lock monitoring

Evaluation is performed via a safety monitor.

AS-Interface outputs

D0

Guard locking

D1

LED red

D2

LED green

LED function display

  • The ASI LED indicates the operating voltage on the bus.
  • The State LED indicates if a fault has been detected on the AS-Interface bus.
  • The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.

Auxiliary release

This is used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer).

Dimension drawing
Dimension drawing
Connector assignment
Connector assignment
Wiring diagram
Wiring diagram
CET: Transponder-coded safety switch with guard locking in use

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples
View of plug side

Connection examples

Connection examples

Technical data

Approvals

EAC_RU C-DE.MO05.B.00971/20c_UL_us_E155795_3/4

Electrical connection values

ASI address 0
ASI operating current 50 mA
ASI data in
according to AS-i Safety at Work D0 (Door position)
according to AS-i Safety at Work D2 (Guard locking)
according to AS-i Safety at Work D1 (Door position)
according to AS-i Safety at Work D3 (Guard locking)
ASI data out
LED red D1 (1 = LED on)
LED green D2 (1 = LED on)
Guard locking solenoid D0 (1 = Solenoid energized)
ASI auxiliary voltage
IEC 60742, PELV 24 V -15% ... +10%
ASI auxiliary current 480 mA
ASI-LED
LED red Fault (Offline phase or address 0)
LED green Power (ASI voltage present)
ASI slave type
according to ASI specification 2.1 EA code: 7
according to ASI specification 2.1 ID code: B
ASI voltage 22.5 ... 30 ... 31.6 V
Safety class
EN IEC 61140 III
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Approach speed max. 20 m/min
Connection type
1 x Plug connector M12 (4-pin)
Installation orientation any (preferably head downward)
Switching frequency max. 0.5 Hz
Degree of freedom X ±5 mm
Degree of freedom Y ±5 mm
Degree of freedom Z ±4 mm
Mechanical life 2 x 10⁶
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP67 (screwed tight plug connector/mating component)
Ambient temperature
at UB = 24 V DC -20 ... +55 °C
Material
Safety switch housing Die-cast aluminum
Ramp Stainless steel
Locking force Fmax 6500 N
Locking force FZh 5000 N (FZH = FMAX/1.3)
Guard locking principle Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Mission time 20 y
Control of guard locking
Category
Any installation orientation B
Performance Level PL b
PFHD
Any installation orientation 4.23 x 10-6
Monitoring of guard locking and the guard position
Category
Any installation orientation 4
Performance Level PL e
PFHD
Any installation orientation 3.1 x 10-9

Miscellaneous

The following applies to the approval according to UL Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Accessories

Downloads

Complete package

Download all important documents with a single click.

Content:

  • The operating instructions and any additions to the operating instructions or brief instructions
  • Any data sheets to supplement the operating instructions
  • The declaration of conformity
Download Complete Package (ZIP, 2,8 MB)

Single Documents

Other Documents

Ordering data

Ordernumber 116515
Item designation CET4-AS-CRA-CB-50X-1-116515
Gross weight 1,247kg
Customs tariff number 85365019000
ECLASS 27-27-24-05 Safety-related transponder switch with guardlocking

Technical support

Technical support
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER (UK) Ltd.
+44 114 2560123
sales(at)euchner.co.uk

EUCHNER USA Inc.
+1 315 701-0315
info(at)euchner-usa.com