KezdőlapProductsTransponder-coded safety switches with guard lockingCTPCTP-APCTP-LBI-AP-U-HA-AZ-SA-127798
Transponder-coded safety switch CTP-LBI-AP, M12
- Safety switch with guard locking and integrated evaluation electronics
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Bistable guard locking
- Up to category 4 / PL e according to EN ISO 13849-1
- With plug connector M12
- Unicode
- Door monitoring output
- Approach directions A, B and C (delivery state)
Ismertetés
Approach direction
Horizontal
Can be adjusted in 90° steps
Unicode evaluation
Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.
Guard locking type
CTP‑LBI | Guard locking operated by means of input signal. |
This type of guard locking has a function to prevent
- persons from unintentionally locking themselves inside if the safety door is open in case of a power failure or if the machine is switched off.
- the deactivation of the activated guard locking in case of a power failure.
Connector assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IMP | Control input of guard locking solenoid | WH |
| 2 | UB | Operating voltage of AP electronics, 24 V DC | BN | |
| 3 | FO1A | Safety output, channel 1 | GN | |
| 4 | FO1B | Safety output, channel 2 | YE | |
| 5 | OI | Diagnostic output | GY | |
| 6 | OD | Door monitoring output | PK | |
| 7 | OL | Guard lock monitoring output | BU | |
| 8 | 0 V UB | Control voltage of guard locking solenoid and operating voltage of AP electronics, 0 V | RD |
Dimensional drawings
| 1 | Auxiliary release |
| 2 | Locking screw |
| 3 | LEDs |
| 4 | Plug connector aligned |
Connection examples
Műszaki adatok
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | 10 % |
Electrical connection values
| Fuse | |
| external (operating voltage UB) | 0.5 ... 8 A |
| Power consumption | 1.7 W |
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 0.5 kV |
| Operating voltage DC | |
| UUB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Utilization category | |
| DC-13 | 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| Solenoid duty cycle | 100 % |
| Switching load | |
| according to UL | 24V DC, Class 2 (alternatively, see operating instructions) |
| Safety class | |
| EN IEC 61140 | III |
| Control voltage | |
| UIMP (HIGH) | 15 ... 24 V |
| UIMP (LOW) | 0 ... 5 V |
| Current consumption | |
| IUB (IMP=LOW) | 40 mA |
| IIMP (IMP=HIGH) | 20 mA |
| IUB (IMP=HIGH) | 440 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OD, OI, OL | |
| Output type | p-switching, short circuit-proof |
| Output voltage | 0.8xUB ... UB V DC |
| Switching current | 1 ... 50 mA |
| Safety outputs FO1A / FO1B | |
| Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| HIGH U(FO1A) / U(FO1B) | UB-1.5 ... UB V DC |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| Discrepancy time | |
| both safety outputs | max. 10 ms Acc. to EN IEC 60947-5-3 |
| Turn-on time | max. 400 ms |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output FO1A / FO1B | 1 ... 150 mA |
| Test pulse duration | max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm) |
| Test pulse interval | min. 100 ms |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Connection type | 1 plug connector M12, 8-pin |
| Extraction force | 10 N |
| Ready delay | max. 1 s |
| Actuating force | 8 N |
| Installation orientation | any |
| Switching frequency | max. 0.5 Hz |
| Mechanical life | 1 x 10⁶ |
| Overtravel | 5 mm |
| Retention force | 5 N |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67/IP69/IP69K (screwed tight plug connector/mating component) |
| Ambient temperature | |
| at UB = 24 V DC | -20 ... +55 °C |
| Material | |
| Switch head cover | Die-cast zinc |
| Safety switch housing | Reinforced thermoplastic |
| Locking force Fmax | 3900 N |
| Locking force FZh | 3000 N (Fzh = Fmax/1.3, depending on the actuator used) |
| Guard locking principle | BiState |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Guard locking control | |
| Mission time | 20 y |
| Category | B |
| Performance Level | PL b |
| PFHD | 2.1 x 10 -9 |
| Guard lock monitoring | |
| Mission time | 20 y |
| Category | 4 |
| Performance Level | PL e |
| PFHD | 4.1 x 10 -9 |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Tartozékok
Actuator
Hinged actuator for safety switch CTP/CTA
122671
A-C-H-RL-LS-122671
A-C-H-RL-LS-122671
- Hinged actuator for doors hinged on the left
- Two safety screws included
122672
A-C-H-RR-LS-122672
A-C-H-RR-LS-122672
- Hinged actuator for doors hinged on the right
- Two safety screws included
122675
A-C-H-RO-LS-122675
A-C-H-RO-LS-122675
- Hinged actuator for top-hinged doors
- Two safety screws included
122676
A-C-H-RU-LS-122676
A-C-H-RU-LS-122676
- Hinged actuator for bottom-hinged doors
- Two safety screws included
Bolt
Bolt for safety switch CTP, CTA
123653
RIEGEL CTP-AC-123653
RIEGEL CTP-AC-123653
- Steel bolt
- For doors hinged on the right and left
- Can be locked in open position with padlocks
- Actuator included
137354
RIEGEL CTP-AC-C2308-137354
RIEGEL CTP-AC-C2308-137354
- Steel bolt
- For doors hinged on the right and left
- Can be locked in open position with padlocks
- Actuator included
- Bolt without door stop, suitable for swing doors
Connection accessories
Function expansion
Lock for auxiliary release for safety switch CTP/CTA/TP/STP
084177
AE-K-A1-DULK1-84177
AE-K-A1-DULK1-84177
- Lock unique locking
- Key removable in “unlocked” and “locked” positions
086236
AE-K-A1-IULK1-86236
AE-K-A1-IULK1-86236
- Identical locking
- Key removable in “unlocked” and “locked” positions
109212
AE-K-A1-IUK2-109212
AE-K-A1-IUK2-109212
- Identical locking
- Key can be removed only in “unlocked” position
121917
AE-K-A1-ILK1-121917
AE-K-A1-ILK1-121917
- Identical locking
- Key removable in “locked” position
Wire front release (bowden)
096230
AE-B-A1-02,0-096230
AE-B-A1-02,0-096230
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 2 m (rope length 6 m)
097747
AE-B-A1-02,0-F-097747
AE-B-A1-02,0-F-097747
- Can be used as escape release or emergency release
- automatic return
- Sheath length 2 m (rope length 6 m)
098313
AE-B-A1-03,0-098313
AE-B-A1-03,0-098313
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 3 m (rope length 6 m)
098314
AE-B-A1-04,0-098314
AE-B-A1-04,0-098314
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 4 m (rope length 6 m)
111233
AE-B-A1-03,0-F-111233
AE-B-A1-03,0-F-111233
- Can be used as escape release or emergency release
- automatic return
- Sheath length 3 m (rope length 6 m)
125582
AE-B-A1-06,0-125582
AE-B-A1-06,0-125582
- Can be used as escape release or emergency release
- no automatic return
- Rope length 6 m (without sheath)
124770
AE-B-A1-06,0-F-124770
AE-B-A1-06,0-F-124770
- Can be used as escape release or emergency release
- automatic return
- Rope length 6 m (without sheath)
Mounting accessories
Efficient protection against tampering for safety switch mounting
161344
AM-C-SW4-V3-161344
AM-C-SW4-V3-161344
- Plastic inserts for hexagon socket screws a/f 4
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
161348
AM-C-SW5-V3-161348
AM-C-SW5-V3-161348
- Plastic inserts for hexagon socket screws a/f 5
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat
Egyedi dokumentumok
Declarations of conformity
EU-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
EU-Konformitätserklärung
Dok. sz.
EDC2123042
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret
UKCA-Konformitätserklärung
Dok. sz.
EDC20001501
Változat
Nyelv
Méret
0,1 MB
Instructions
Operating instructions
Dok. sz.
Változat
Nyelv
Méret
Operating instructions
Mode d’emploi
Manual de instrucciones
Manual de instruções
使用说明书
操作説明書
사용 설명서
Návod k použití
Mode d’emploi
Manual de instrucciones
Manual de instruções
使用说明书
操作説明書
사용 설명서
Návod k použití
Dok. sz.
2136918
Változat
05-12/20
Nyelv
Méret
3,9 MB
Mode d'emploi Interrupteur de sécurité à codage par transpondeur CTP-LBI-AP uni-/multicode
Dok. sz.
2136918
Változat
05-12/20
Nyelv
Méret
3,9 MB
Manual de instrucciones Interruptor de seguridad con codificación por transponder CTP-LBI-AP Unicode/Multicode
Dok. sz.
2136918
Változat
05-12/20
Nyelv
Méret
3,9 MB
Betriebsanleitung Transpondercodierter Sicherheitsschalter CTP-LBI-AP Uni-/Multicode
Dok. sz.
2136918
Változat
05-12/20
Nyelv
Méret
3,9 MB
Istruzioni di impiego Finecorsa di sicurezza con codifica a transponder CTP-LBI-AP Uni-/Multicode
Dok. sz.
2136918
Változat
05-12/20
Nyelv
Méret
3,9 MB
Egyéb dokumentumok
Approvals and certificates
FCC
Dok. sz.
Változat
Nyelv
Méret
FCC
Dok. sz.
Változat
Nyelv
Méret
0,1 MB
IC
Dok. sz.
Változat
Nyelv
Méret
IC
Dok. sz.
Változat
Nyelv
Méret
1,8 MB
c UL us
Dok. sz.
Változat
Nyelv
Méret
c UL us
Dok. sz.
Változat
Nyelv
Méret
1,0 MB
Sales documents
UQS document
Bescheinigung
Dok. sz.
Változat
Nyelv
Méret
Bescheinigung
Dok. sz.
ECO2127798
Változat
Nyelv
Méret
0,2 MB
CAD-adatok
Rendelési adatok
| Rend. sz. | 127798 |
| Cikk neve | CTP-LBI-AP-U-HA-AZ-SA-127798 |
| Súly | 0,6kg |
| Vámtarifaszám | 85365019000 |
| ECLASS | 27-27-24-05 Safety-related transponder switch with guardlocking |
