AnasayfaProductsEnabling switchZSG, ZSE, ZXE built-in enabling switchesZSE2-4C1943

ZSE2-4C1943 (Sip. No. 083477)

ZSE, 3-stage

  • 3-stage function
  • 30.5 mm installation dimension
  • Suitable for installation in hand-held pendant stations HBL, enabling switch housing G2 or G3 or control panel, for example
ZSE2-4C1943 (Sip. No. 083477)

Açıklama

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Switching element

220

2 NO + 2 NC

Dimension drawing
Dimension drawing
Dimension drawing
Dimension drawing
Wiring diagram 220
Wiring diagram 220
Travel diagram
Travel diagram

Dimensional drawings

Dimensional drawings

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples

Shift travel diagrams

Shift travel diagrams
square_grey_dark.epsclosed, enabling
square_grey_light.epsclosed
square_white.epsopen

Teknik Veriler

Approvals

CCC2024010305643680_EnableSwitch_ZEAC_RU C-DE.MO05.B.00972/20

Electrical connection values

Fuse max. 4 A gG
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 250 V
Rated impulse voltage Uimp 2.5 kV
Utilization category
DC-13 3 A 24 V
AC-15 4 A 230 V
Switching voltage
at 10mA min. 12 V
Switching current
at 24V min. 1 mA
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Connection type Tab connector 2.8 x 0.8 IEC 760 + soldered connection
Number of NO contacts 2
Number of positively driven contacts 2
Installation orientation any
Storage temperature -25 ... 70 °C
Mechanical life
Position 1-2-1 0.1 x 10⁶
Position 1-2-3-1 0.1 x 10⁶
Switching principle Slow-action contact element
Degree of protection
IP00 (Connections)
IP65 (in the installed state)
Ambient temperature -5 ... 60 °C
Material
Housing Plastic, color black
Cap Elastomer, low PAH, black

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Enabling switch
B10D 0.5 x 10⁶

Miscellaneous

C number
C1943 for installation in HBL, fastening hole Ø30.5 +0.5, without pin for protection against twisting, total length shortened by 8 mm
in compliance with 60947-5-8

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 1,7 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 083477
Makale adı ZSE2-4C1943
Ağırlık 0,096kg
Global Trade Item Number (GTIN) 4047048000803
Gümrük sınıfı 85365019000
ECLASS 27-37-12-38 Agreement switch