AnasayfaProductsSafety relays, control systems and filter moduleSafety relay ESMESM-TE301

ESM-TE301 (Sip. No. 085617)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Contact expansion ESM-TE.., 3 safety contacts, 1 auxiliary contact, time-delay, cat. 3

Use up to category 3 according to EN ISO 13849-1
LED status indicators
Control using safety relays
3 redundant time-delayed safety contacts
Delay time range 1 s–30 s
1 auxiliary contact
Earth fault/ground fault monitoring can be selected

Açıklama

Relay outputs

The outputs are electrically decoupled and of redundant design.

Connection

By using suitable wiring the following function can be selected:

Earth fault/ground fault monitoring to detect short circuits between the connecting cables and earth or ground and to shut down the outputs or prevent relay starting if necessary.

Time-delayed shutdown

The release time for the time-delay contacts can be set as required using a potentiometer on the safety relay.

Dimensional drawings

Connection examples

Teknik Veriler

Onaylar

Zulassung TÜV Rheinland, BMPB mit ZG: Product Safety, Functional Safety

Mekanik Değerler ve Çevre

Housing material
Housing	Polyamide PA6.6
Weight
Net	0,23 kg
Ambient temperature
At U_B = 24V AC	-15 ... 40 °C
At U_B = 24V DC	-15 ... 60 °C
Degree of protection	IP20
Mechanical life
operating cycles	10 x 10⁶
Contact material	AgNi-10
Mounting method	Mounting rail 35mm according to DIN EN 60715 TH35
Connection	Connection terminals
Length of control cable
With conductor cross-section 0.75mm²	1000 m
	Safety contacts 17/18, 27/28, 37/38
Number of safety contacts	3
	Auxiliary contacts S25/S26
Number of auxiliary contacts	1

Elektriksel Bağlantı Değerleri

Operating voltage
AC/DC	24 V -10% ... +10% (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp
Leakage path/air gaps	4 kV
Overvoltage category according to IEC EN 60664-1	3
Reverse polarity protection
On version U_B =24V DC
Connection rating
at 24V DC	1,5 W
Degree of contamination (external, according to EN 60947-1)	2
Connection cross-section	0,14 ... 2,5 mm² (Connection terminal (size))
Test voltage
Control system/contacts	2,5 kV
Control voltage
On S11	24 V
Control current
S11...S14	40 mA
LED indicator	2 status displays (green) for relays K1 and K2
	Auxiliary contacts S25/S26
Type of output
NC	As monitoring contact for safety relay
Switching characteristics	Auxiliary contacts with adjustable time-delay
	Safety contacts 17/18, 27/28, 37/38
Type of output
NO	Relay contacts, positively driven (redundant) (Positively driven relay according to EN 50205)
Switching voltage
DC	max.24 V
AC	max.250 V
Switching current	min.20 mA at 24V
Cumulative current	max.10,5 A For all contacts (Also applies for UL)
Fusing
External contact fuses (safety circuit) according to IEC 60269-1	10A gG
Utilization category acc. to EN 60947-5-1
AC-15	4A, 250V
DC-13	2A, 24V
AC-12	6A ohmic load, 250V
DC-12	1.25A ohmic load, 24V
Breaking capacity according to UL	6A 250V AC / 2A 24V DC per contact
Switching characteristics	Safety contacts with adjustable time-delay
Delay time
Continuously adjustable	1 ... 30 s

Çeşitli

In compliance with	EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN 50581: 2012 (RoHS)

In compliance with

EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN 50581: 2012 (RoHS)

EN ISO 13849-1 uyarınca güvenilirlik değerleri

Performance Level	PL d (This value is dependent on the number of switching cycles and the switching current.)
Category	3 (This value is dependent on the number of switching cycles and the switching current.)
PFH_D	1.03 x 10^-7 (This value is dependent on the number of switching cycles and the switching current.)
Number of switching cycles
≤ 0.1 A at 24 V DC	max.400000 1/Jahr
≤ 1 A at 24V DC	max.73000 1/Jahr
≤ 2 A at 24 V DC	max.17000 1/Jahr
Mission time	20 y (This value is dependent on the number of switching cycles and the switching current.)

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
Kullanım talimatlarını tamamlayan tüm veri sayfaları
Uygunluk beyanı

Paketin tamamını indirin (ZIP, 2,4 MB)