AnasayfaProductsElectromechanical safety switches with guard lockingTZ proven metal switchTZ1RE024SEM4AS1-C1937
Safety switch TZ ASi, plug connector M12, emergency release (closed-circuit current principle)
- Emergency release on the front with rotary knob
- Actuating head fitted right
Açıklama
Guard locking type
TZ1 | Closed-circuit current principle, guard locking by spring force. Release by control of AS-i output 0. |
Control of the guard locking solenoid
The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0. In addition, the 24V connection can be switched safely.
AS-Interface inputs
D0, D1 | Door monitoring contact SK |
D2, D3 | Solenoid monitoring contact ÜK |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D0 | Guard locking solenoid |
D1 | LED red |
D2 | LED green |
LED function display
- The Power LED indicates the operating voltage on the bus.
- The Fault LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Emergency release
It is used for manual release of the guard locking without tools in an emergency. The emergency unlocking mechanism must be returned to the locked state manually. A sealing wire is fitted to protect against tampering.
Dimensional drawings
| 1 | Emergency unlocking (rotary knob) |
| 2 | Plug connector not aligned |
Connection examples
| View of plug side |
Teknik Veriler
Approvals
Electrical connection values
| ASI operating current | max. 45 mA |
| ASI data in | |
| according to AS-i Safety at Work | D0, D1, D2, D3 (see positively driven contact) |
| ASI data out | |
| LED red | D1 (1 = LED on) |
| Guard locking solenoid | D0 (1 = Solenoid energized) |
| LED green | D2 (1 = LED on) |
| ASI auxiliary voltage | |
| IEC 60742, PELV | 24 V -15% ... +10% |
| ASI auxiliary current | 350 mA |
| ASI-LED | |
| LED green | Power (ASI voltage present) |
| LED red | Fault (Offline phase or address 0) |
| ASI slave type | |
| according to ASI specification 2.1 | ID code: B |
| according to ASI specification 2.1 | EA code: 7 |
| ASI voltage | 22.5 ... 30 ... 31.6 V |
| Solenoid duty cycle | 100 % |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Approach direction | |
| Actuating head on the right | A |
| Connection type | |
| 1 x | Plug connector M12 (4-pin) |
| Number of door position positively driven contacts | |
| according to AS-i Safety at Work | 1 (D0,D1 / 1 = door closed) |
| Number of guard lock monitoring positively driven contacts | |
| according to AS-i Safety at Work | 1 D2,D3 (1 = locked) |
| Extraction force | 30 N |
| Actuation frequency | max. 1200 1/h |
| Actuating force | 35 N |
| Installation orientation | any |
| Insertion depth | 52 mm |
| Mechanical life | 1 x 10⁶ |
| Retention force | 10 N |
| Switching principle | Slow-action switching contact |
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +55 °C |
| Material | |
| Contact | Silver alloy, gold flashed |
| Housing | Anodized die-cast alloy |
| Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| B10D | Mission time | |
|---|---|---|
| Monitoring of the guard position | 3x106 | 20 y |
| Important! Values valid at DC-13 100 mA/24V | ||
| Monitoring of guard locking | 3x106 | 20 y |
| Important! Values valid at DC-13 100 mA/24V | ||
Miscellaneous
| C number | |
| C1937 | with auxiliary release, special wiring ((rotary knob, latching)) |
In combination with actuator ACTUATOR-Z-G
| Overtravel | 4 mm |
In combination with actuator ACTUATOR-Z-GN
| Overtravel | 16 mm |
Aksesuar
Actuator
Actuator for safety switches NZ.VZ, NZ.VZ.VS and TZ
016849
BETAETIGER-Z-G
BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator
074411
BETAETIGER-Z-G/V25
BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces
072251
BETAETIGER-Z-GN
BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator
097436
BETAETIGER-Z-GME
BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator
Bolt
Bolt TZ-A... for safety switch TZ
057736
RIEGEL TZ-A
RIEGEL TZ-A
- Steel bolt
- For doors hinged on the right
- Can be locked in open position with padlocks
- Actuator and switch bracket included
096057
RIEGEL TZ-A-NIRO-C2101
RIEGEL TZ-A-NIRO-C2101
- Stainless steel bolt
- For doors hinged on the right
- Can be locked in open position with padlocks
- Actuator and switch bracket included
117193
RIEGEL TZ-A-NIRO-C2392
RIEGEL TZ-A-NIRO-C2392
- Stainless steel bolt
- For doors hinged on the right
- Can be locked in open position with padlocks
- Actuator and switch bracket included
Bolts NZ/TZ-S1 and NZ/TZ-S2 for safety switches NZ.VZ, NZ.VZ.VS and TZ
028357
RIEGEL NZ/TZ-S1
RIEGEL NZ/TZ-S1
- Aluminum bolt
- For doors hinged on the left or right. Cone grip bottom.
- Spring catch in open position
- Can be locked in open position with padlocks
- Actuator included
028359
RIEGEL NZ/TZ-S2
RIEGEL NZ/TZ-S2
- Aluminum bolt
- For doors hinged on the left or right. Cone grip top.
- Spring catch in open position
- Can be locked in open position with padlocks
- Actuator included
İndirme
Komple paket
Tüm önemli belgeleri tek bir tıklama ile indirin.
İçerik:
- Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
- Kullanım talimatlarını tamamlayan tüm veri sayfaları
- Uygunluk beyanı
Tek Belgeler
Declarations of conformity
EU declaration of conformity
Dok. No.
Versiyon
Dil
Boyut
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. No.
EDC2539628
Versiyon
Dil
Boyut
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Dok. No.
EDC2539628
Versiyon
Dil
Boyut
0,2 MB
UKCA-Konformitätserklärung
Dok. No.
Versiyon
Dil
Boyut
UKCA-Konformitätserklärung
Dok. No.
EDC20001551
Versiyon
Dil
Boyut
0,1 MB
Instructions
Operating Instructions Safety Switch TZ…AS1
Dok. No.
Versiyon
Dil
Boyut
Operating Instructions Safety Switch TZ…AS1
Mode d’emploi Interrupteur de sécurité TZ…AS1
Betriebsanleitung Sicherheitsschalter TZ…AS1
Istruzioni di impiego Finecorsa di sicurezza TZ…AS1
Mode d’emploi Interrupteur de sécurité TZ…AS1
Betriebsanleitung Sicherheitsschalter TZ…AS1
Istruzioni di impiego Finecorsa di sicurezza TZ…AS1
Dok. No.
2086963
Versiyon
01/24
Dil
Boyut
4,6 MB
Betriebsanleitung Sicherheitsschalter TZ…AS1
Dok. No.
2086963
Versiyon
01/24
Dil
Boyut
1,3 MB
Инструкция по эксплуатации Предохранительный выключатель TZ…AS1
Dok. No.
2086963
Versiyon
01/24
Dil
Boyut
1,7 MB
Diğer Belgeler
Approvals and certificates
DGUV
Dok. No.
Versiyon
Dil
Boyut
DGUV
Dok. No.
Versiyon
Dil
Boyut
1,1 MB
DNV-GL
Dok. No.
Versiyon
Dil
Boyut
DNV-GL
Dok. No.
Versiyon
Dil
Boyut
0,2 MB
c UL us
Dok. No.
Versiyon
Dil
Boyut
c UL us
Dok. No.
Versiyon
Dil
Boyut
0,3 MB
CAD Verileri
Sipariş verileri
| Sip. No. | 090279 |
| Makale adı | TZ1RE024SEM4AS1-C1937 |
| Ağırlık | 1,212kg |
| Gümrük sınıfı | 85365019000 |
| ECLASS | 27-27-26-03 Safety switch with guard control |
