AnasayfaProductsElectromechanical safety switches without guard lockingNX metal switchNX1-2131ASEM4-AS1

NX1-2131ASEM4-AS1 (Sip. No. 094362)

Safety switch NX ASi, plug connector M12

  • Plug connector M12, 4-pin
  • 2 pos. driven contact
  • LED indicator
NX1-2131ASEM4-AS1 (Sip. No. 094362)

Açıklama

Approach direction

Horizontal and vertical

Can be adjusted in 90° steps

AS-Interface inputs

D0, D1

Positively driven contact 1

D2, D3

Positively driven contact 2

AS-Interface outputs

D1

LED red

D2

LED green

LED indicator

The Power LED indicates the operating voltage on the bus.

The Fault LED indicates if a fault has been detected on the AS-Interface bus.

The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.

Accessories required

Actuator is not included.

Dimension drawing
Dimension drawing
Connector assignment
Connector assignment
Electromechanical safety switches in use

Dimensional drawings

Dimensional drawings
1LED indicator red
2LED indicator green

Connection examples

Connection examples
View of connection side

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00971/20DNV-GL_TAA0000172 Rev. 1CCC2024010305643584_SafetySwitch Nc_UL_us_E155795_2/1Asi Interface_60902

Electrical connection values

ASI operating current max. 45 mA
AS-Interface protocol ASi-3
ASI data out D1 = red LED, D2 = green LED
ASI data in D0, D1 = door position (1st positively driven contact), D2, D3 = door position (2nd positively driven contact)
AS-Interface slave type ID-Code: B, EA-Code: 7
ASI voltage 22.5 ... 30 ... 31.6 V

Mechanical values and environment

Approach speed max. 20 m/min
Connection type
1 x M12 plug connector, 4-pin
Number of door position positively driven contacts
according to AS-i Safety at Work
Extraction force 50 N
Actuation frequency max. 6700 1/h
Actuating force max. 40 N
Installation orientation any
Mechanical life 2 x 10⁶
Retention force 10 N
Switching principle Slow-action switching contact
Degree of protection IP67 (In the inserted and screwed tight state)
Ambient temperature -20 ... 55 °C
Material
Contact Silver alloy, gold flashed
Housing Alloy cathodically dipped

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Monitoring of the guard position4.5x10620 y
Important! Values valid at DC-13 100 mA/24V


In combination with actuator ACTUATOR-X-GNQ

Overtravel 8 mm

In combination with actuator ACTUATOR-X-GQ

Overtravel 1 mm

Aksesuar

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 2,5 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 094362
Makale adı NX1-2131ASEM4-AS1
Ağırlık 0,513kg
Gümrük sınıfı 85365019000
ECLASS 27-27-26-02 Safety switch with separate actuator (Type 2)