NZ2PS-538SEM4AS1 (Sip. No. 095254)

Safety switch NZ.PS ASi, adjustable lever arm with steel roller, plug connector M12

  • AS-Interface
  • Lever arm, steel roller ø 18 mm
  • Housing according to EN 50041
  • Plug connector M12, 4-pin
  • 2 pos. driven contact
  • LED indicator
NZ2PS-538SEM4AS1 (Sip. No. 095254)

Açıklama

Approach direction

Horizontal

Can be adjusted in 90° steps

AS-Interface inputs

D0, D1

Positively driven contact 1

D2, D3

Positively driven contact 2

AS-Interface outputs

D1

LED red

D2

LED green

LED indicator

The Power LED indicates the operating voltage on the bus.

The Fault LED indicates if a fault has been detected on the AS-Interface bus.

The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.

Dimension drawing
Dimension drawing
Connector assignment
Connector assignment
Travel diagram
Travel diagram
Electromechanical safety switches in use

Dimensional drawings

Dimensional drawings
1Positive opening function is dependent on maintaining this distance.
2Actuator (dog) must be positively mounted on the machine. Switch can be replaced only with the same type.
A=Operating point
B=End position
C=Reset point

Connection examples

Connection examples
View of connection side

Shift travel diagrams

Shift travel diagrams
g_Kontakte_geschlossen_sw.epsContacts closed
g_Kontakte_offen_sw.epsContacts open
g_Kontakte_zwangsgeoeffnet_sw.epsContacts positively driven

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00971/20DNV-GL_TAA0000172 Rev. 1DGUV_NZ_ET 23025_ET 23026CCC2024010305643584_SafetySwitch NAsi Interface_56201

Electrical connection values

ASI operating current max. 45 mA
AS-Interface LED
red Fault
green Power
AS-Interface protocol ASi-3
ASI data out D1 = red LED, D2 = green LED
ASI data in D0, D1 = door position (1st positively driven contact), D2, D3 = door position (2nd positively driven contact)
AS-Interface slave type ID-Code: B, EA-Code: 7
ASI voltage 22.5 ... 30 ... 31.6 V

Mechanical values and environment

Anfahrgeschwindigkeit 0.1 ... 30 m/min
Connection type
1 x Plug connector M12 (4-pin)
Actuating element
Slide bearing metal Lever arm adjustable (d roller = 18 mm, length = 28 - 78 mm)
Actuating force min. 15 N
Installation orientation any
Storage temperature -25 ... 70 °C
Mechanical life 30 x 10⁶
Switching principle Slow-action switching contact
Degree of protection IP67
Ambient temperature -25 ... 70 °C
Material
Housing Anodized die-cast alloy
Contact Silver alloy, gold flashed

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Safe position sensing2x10720 y
Important! Values valid at DC-13 100 mA/24V


İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 3,0 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 095254
Makale adı NZ2PS-538SEM4AS1
Ağırlık 0,391kg
Gümrük sınıfı 85365019000
ECLASS 27-27-26-01 Safety position switch (Type 1)