AnasayfaProductsMultifunctional Gate Box MGBMGB-PNMGB-L1HB-PNC-R-116518

MGB-L1HB-PNC-R-116518 (Sip. No. 116518)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Locking set MGB-L1...-PN (guard locking by spring force) with 3 control elements, push-pull plug, RC12

Guard locking with guard lock monitoring
3 illuminated pushbuttons with symbol
Push-pull plug
including terminal plug for enabling switch (RC12, 12-pin)
Pre-assembled on mounting plates
Multicode

Açıklama

Profinet connection

Connection via push-pull plugs according to IEC 61076-3-117

Flexible use as interlocking or guard locking

By means of the corresponding evaluation of the safe device data by the control system, use can be as either interlocking or guard locking (with or without monitoring).

Installation orientation	Door hinge DIN right
Storage temperature	-25 ... 70 °C
Degree of protection	IP65
Ambient temperature	-20 ... 55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel

Product version number	V3.0.0
Additional feature	with mounting plate and automatic lockout mechanism

Secured switch-off distance s_ar
Only with sliding door	20 mm (Only applies for use on sliding doors with deactivated guard lock monitoring)

Item	Color	Extras	Version	Switching element
90	white	printed	Illuminated pushbutton	1NO
91	yellow	printed	Illuminated pushbutton	1NO
92	blue	printed	Illuminated pushbutton	1NO

Connecting cable
Ethernet	Profinet I/O cable, at least cat. 5e
Rated insulation voltage U_i	75 V
Rated impulse voltage U_imp	0.5 kV
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1	max. 4000 mA
Safety class	III
Current consumption	max. 500 mA
Transponder coding	Multicode
Degree of contamination (external, according to EN 60947-1)	3
	Power supply X1
Fuse
external	min. 1 A slow blow
Operating voltage DC
L1	24 V DC -15% ... +10% ((reverse polarity protected, regulated, residual ripple<5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)

Connection type
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at least cat. 5e	Push-pull RJ45 (X4 (The document PROFINET 'Cabling and Interconnection Technology' from the PNO aids in the correct selection of cables.))
for enabling switch	Plug connector RC12 (X14)
	Push-pull power (X1 (The document PROFINET 'Cabling and Interconnection Technology' from the PNO aids in the correct selection of cables.))
Installation orientation	Door hinge DIN right
Switching frequency	0.25 Hz
Storage temperature	-25 ... 70 °C
Mechanical life
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
	1 x 10⁶
Response time
Guard locking	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Door position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Enabling switch	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP54
Ambient temperature
at U_B = 24 V DC	-20 ... 55 °C
Material
Housing	Fiber glass reinforced plastic, nickel-plated die-cast zinc, stainless steel
Locking force F_Zh	2000 N
Guard locking principle	Closed-circuit current principle

	PL	Maximum SIL	PFH_D	Category	Mission time
Control of guard locking	PL e	-	3.91x10^-8	4	20 y
Monitoring of the guard position	PL e	3	4.07x10^-8	4	20 y
Monitoring of guard locking	PL e	3	4.07x10^-8	4	20 y
Evaluating safety signals	PL e	3	4.1x10^-8	4	20 y
Evaluating safety signals	Applies to all additionally included safety functions such as EMERGENCY STOP, enabling switch, etc.

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet

Sip. No.	116518
Makale adı	MGB-L1HB-PNC-R-116518
Ağırlık	5,678kg
Gümrük sınıfı	85371098
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

Occupancy diagram
	B1
	L0

MGB-L1HB-PNC-R-116518 (Sip. No. 116518)

Locking set MGB-L1...-PN (guard locking by spring force) with 3 control elements, push-pull plug, RC12

Açıklama

Profinet connection

Dimensional drawings

Teknik Veriler

Approvals

Handle modules MGB-H-AA1A6-R-111838 (Order no. 111838)

Mechanical values and environment

Miscellaneous

Locking modules MGB-L1B-PNC-R-116517 (Order no. 116517)

Workspace

Operating and display elements

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Miscellaneous

Interface

Bileşenler

Aksesuar

İndirme

Komple paket

Tek Belgeler

Diğer Belgeler

CAD Verileri

Sipariş verileri

Çerez bildirimi