AnasayfaProductsTransponder-coded safety switches with guard lockingCTMCTM-ASCTM-L2-AS1B-U-ZZ-SJ-P-163974

CTM-L2-AS1B-U-ZZ-SJ-P-163974 (Sip. No. 163974)

Safety switch with guard locking CTM-AS ASi, RFID, plug connector(s) M12

  • AS-Interface
  • Open-circuit current principle
  • Guard locking suitable for process protection only
  • Unicode
  • Plug connector M12, 4-pin
  • Actuating/extraction/retention force: 35/30/15 N
  • Hygienic version
CTM-L2-AS1B-U-ZZ-SJ-P-163974 (Sip. No. 163974)

Açıklama

Guard locking principle

Open-circuit current (power on to lock): On a guard with guard locking based on the open-circuit current principle, the guard is locked until the power supply to the guard locking solenoid is interrupted. Unlocking is by spring force. The term electrical guard locking is also used.

Guard locking for process protection

The safety switch meets the requirements for interlocking devices with guard locking for process protection. It does not possess safe guard lock monitoring.

Switching function

The safety outputs are switched on when guard locking is active.

Unicode evaluation

Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in.

Only the last actuator taught-in is detected.

Control of the guard locking solenoid

The guard locking solenoid is controlled via AS-Interface bit D0. In order to achieve safe control of the guard locking, the auxiliary voltage must also be switched safely.

Auxiliary voltage

The ASi auxiliary voltage is required to supply the guard locking solenoid.

AS-Interface inputs

D0, D1

Monitoring of the guard position

D2, D3

Guard lock monitoring

AS-Interface outputs

D0

Control of guard locking

LED indicator

The ASI LED indicates the status of the ASi bus.

The LOCK LED indicates the status of the guard locking.

The STATE/DIA LED indicates the status of the switch and possible errors.

Terminal assignment

Plug connector (view of connection side)PinDesignationFunction

1ASi AS-Interface +
20 VAuxiliary power 0 V
3ASi -AS-Interface -
424 VAuxiliary power 24 V

Accessories required

Actuator is not included.

Dimension drawing
Dimension drawing
Connector assignment
Connector assignment
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings
1LEDs
2Active read head face

Connection examples

Connection examples
View of plug side

Connection examples

Connection examples

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00971/20Asi Interface_136101_CTMFCC_2AJ58-07_

Workspace

Repeat accuracy R 10 %

Electrical connection values

ASI operating current max. 50 mA
AS-Interface auxiliary voltage 20.4 ... 24 ... 26.4 V
Auxiliary current AS-Interface 650 mA
AS-Interface protocol ASi-3
ASI data out D0 = control of guard locking
ASI data in D0, D1 = door position, D2, D3 = guard locking
AS-Interface slave type ID-Code: B, EA-Code: 7
ASI voltage 26.5 ... 30 ... 31.6 V
EMC protection requirements Acc. to EN IEC 60947-5-3
Solenoid duty cycle 100 %
Switching load DC 24V, UL Class 2 (alternatively, see operating instructions)
Safety class III
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Anfahrgeschwindigkeit max. 20 m/min
Connection type Plug connector M12, 4-pin
Extraction force 30 N
Ready delay 3 s
Actuating force 35 N
Installation orientation any
Switching frequency max. 0.25 Hz
Storage temperature -25 ... 70 °C
Mechanical life 1 x 10⁶
Overtravel 2 mm
Retention force 15 N
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP65/IP67/IP69/IP69K (In the inserted and screwed tight state)
Ambient temperature
at UB = 24 V DC -20 ... 60 °C
Material
Seals Fluorinated rubber (FKM)
Safety switch housing Reinforced thermoplastic
Locking force Fmax 1300 N
Locking force FZh 1000 N
Guard locking principle Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

PLMaximum SILPFHDCategoryMission time
Monitoring of the guard positionPL e34.83x10-9420 y


Miscellaneous

Notices for UL approval Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 4,2 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 163974
Makale adı CTM-L2-AS1B-U-ZZ-SJ-P-163974
Ağırlık 0,26kg
Gümrük sınıfı 85365019000
ECLASS 27-27-24-05 Safety-related transponder switch with guardlocking