EUCHNER – More than safety.
EUCHNER – More than safety.
 

CET-L1AHE-AP-U-167424 (Sip. No. 167424)

Teknik Veriler

Actuator CET-A-BWK-50X (Order no. 096327)

Actuator CET-A-BWK-50X (Order no. 096327)

Electrical connection values

Power supply Inductive via read head

Mechanical values and environment

Approach direction Any
Installation orientation any (Active face opposite read head)
Mechanical life 2 x 10⁶
Degree of protection IP67 (Degree of protection of the transponder)
Ambient temperature -20 ... +55 °C
Material stainless steel
Locking force Fmax 6500 N
Locking force FZh 5000 N

Switch CET3-AP-CRA-AH-50F-SI-114073 (Order no. 114073)

Switch CET3-AP-CRA-AH-50F-SI-114073 (Order no. 114073)

Workspace

Repeat accuracy R
according to EN 60947-5-2 10 %

Electrical connection values

Fuse
external (operating voltage UB) 0.25 ... 8 A
external (solenoid operating voltage UCM) 0.5 ... 8 A
Power consumption
Solenoid 11 W
Connecting cable 30V DC, 2A (for UL requirement UL category code (CYJV/CYJV7))
Operating voltage DC
UB 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
LED 24 V DC -15% V DC ... +10% V DC
EMC protection requirements Acc. to EN IEC 60947-5-3
Utilization category
DC-13 24 V 200 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Solenoid operating voltage DC
UCM 24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV
Solenoid duty cycle 100 %
Risk time according to EN 60947-5-3 max. 400 ms
Switching load
according to UL 24V DC, Class 2 (For alternatives, see operating instructions)
Safety class
EN IEC 61140 III
Current consumption
IB 80 mA
ICM 450 mA
Test pulse duration max. 0.3 ms (Applies to a load with C<= 30 nF and R<= 20 kohm)
Degree of contamination (external, according to EN 60947-1) 3
Safety outputs OA / OB
Output type 2 semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(OA,OB) 0 ... 1 V DC
HIGH U(OA,OB) UB-1.5V ... UB V DC
Discrepancy time
both safety outputs max. 10 ms
Turn-on time 400 ms
Off-state current Ir max. 0.25 mA
Risk time according to EN 60947-5-3
Single device
Switching current
per safety output OA / OB 1 ... 200 mA

Mechanical values and environment

Approach speed max. 20 m/min
Connection type 2 plug connector M12, 5-pin
Ready delay 1 s
Installation orientation any (preferably head downward)
Switching frequency max. 0.5 Hz
Degree of freedom X ±5 mm
Degree of freedom Y ±5 mm
Degree of freedom Z ±4 mm
Mechanical life 2 x 10⁶
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP67 (screwed tight plug connector/mating component)
Ambient temperature
at UB = 24 V DC -20 ... +55 °C
Material
Ramp Stainless steel
Safety switch housing Die-cast aluminum
Locking force Fmax 6500 N
Locking force FZh 5000 N
Guard locking principle Closed-circuit current principle

Miscellaneous

The following applies to the approval according to UL Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

RIEGEL CET-A-C/F (Order no. 106172)

RIEGEL CET-A-C/F (Order no. 106172)

Mechanical values and environment

Approach direction A or C
Number of safety switches that can be mounted 1
Escape release yes
Material
Base plate Galvanized steel
Handle Plastic
Guide strips Plastic
Switch bracket Steel powder-coated

Miscellaneous

Detent mechanism open position Bolt detent mechanism

Bileşenler

CET-A-BWK-50X
096327
CET-A-BWK-50X
Actuator CET-A-BWK-50X
  • Actuator for read head/safety switch CET
  • Transponder coding
  • Four safety screws M5x16 included
CET3-AP-CRA-AH-50F-SI-114073
114073
CET3-AP-CRA-AH-50F-SI-114073
Non-contact safety switch CET-AP-..., with escape release, for connection to decentralized peripheral systems
  • Safety switch with guard locking and integrated evaluation electronics
  • Locking force up to 6500 N
  • Direct connection to decentralized peripheral systems (e.g. ET200pro)
  • Short circuit monitoring
  • 2 safety outputs (semiconductor outputs)
  • Category 4 / PL e according to EN ISO 13849-1
  • With 2 plug connectors M12
  • Unicode
  • Indication of the door position by LED
  • Escape release, 75 mm long
  • Approach direction A (delivery state)
RIEGEL CET-A-C/F
106172
RIEGEL CET-A-C/F
Bolt CET-A-C/F with escape release
  • Steel bolt
  • For doors hinged on the left or right
  • In combination with CET with escape release
  • Detent knob in open position
  • Can be locked in open position with padlocks

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 9,4 MB)

Sipariş verileri

Sip. No. 167424
Makale adı CET-L1AHE-AP-U-167424
Ağırlık 4,9kg
Gümrük sınıfı 83014090
ECLASS 27-27-24-05 Safety-related transponder switch with guardlocking

Teknik Destek

Teknik Destek
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER End. Emn. Tek. Ltd. Sti.
+90 216 521-1000
info(at)euchner.com.tr