NZ2RS-511SEM5L060GEC2528 (Sip. No. 169173)

Safety switch NZ.RS, roller plunger, steel roller ø 12 mm, plug connector M12

  • Roller plunger, steel roller ø 12 mm
  • Plug connector M12, 5-pin
  • 1 pos. driven contact
  • 1 NO contacts
  • LED indicator: AC/DC 12-60 V yellow
NZ2RS-511SEM5L060GEC2528 (Sip. No. 169173)

Açıklama

Approach direction

Horizontal

Can be adjusted in 90° steps

LED indicator

The switch has one freely assignable LED indicator.

Switching element

511

Snap-action switching contact, 1 positively driven contact + 1 NO contact

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram
Travel diagram
Travel diagram
Electromechanical safety switches in use

Dimensional drawings

Dimensional drawings
1Guide lug aligned
2Dog
3without earth conductor
4Not leading
55-pin
6Positive opening function is dependent on maintaining this distance.
7Actuator (dog) must be positively mounted on the machine.
8Switch can be replaced only with the same type.
AOperating point
BFree position

Connection examples

Connection examples

Shift travel diagrams

Shift travel diagrams
g_Kontakte_geschlossen_sw.epsContacts closed
g_Kontakte_offen_sw.epsContacts open
g_Kontakte_zwangsgeoeffnet_sw.epsContacts positively driven

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00971/20DNV-GL_TAA0000172 Rev. 1CCC2024010305643584_SafetySwitch N

Electrical connection values

Fuse max. 4 A gG
Display module
AC/DC 12 ... 60 V LED yellow
Rated insulation voltage Ui 50 V
Rated impulse voltage Uimp 1.5 kV
Operating voltage
12 ... 60 V
Utilization category
DC-13 24V 4A
AC-15 30V 4A
Switching current
min. at switching voltage DC 24 V 10 mA
thermal rated current Ith 4 A

Mechanical values and environment

Anfahrgeschwindigkeit 0.1 ... 20 m/min
Connection type
1 x Plug connector M12 (5-pin, connection cross-section 0.34 mm². Earthing not connected, not leading)
Number of NO contacts 1
Number of door position positively driven contacts 1
Actuating element
Slide bearing metal Roller plunger (Steel roller, d roller = 12 mm)
Actuating force 15 ... 30 N
Installation orientation any
Storage temperature -25 ... 80 °C
Mechanical life 30 x 10⁶
Contact bounce time max. 3 ms
Switching principle Snap-action switching contact
Schließzeit max. 4 ms
Degree of protection IP67
Ambient temperature -25 ... 80 °C
Material
Housing Anodized die-cast alloy
Contact Silver alloy, gold flashed

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Safe position sensing2x10720 y
Important! Values valid at DC-13 100 mA/24V


Miscellaneous

C number
C2528
Additional feature Housing without earth conductor! All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN IEC 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent insulation measures.

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 4,4 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 169173
Makale adı NZ2RS-511SEM5L060GEC2528
Ağırlık 0,35kg
Gümrük sınıfı 85365019000
ECLASS 27-27-26-01 Safety position switch (Type 1)