AnasayfaProductsElectromechanical safety switches with guard lockingTP proven plastic switchTP1-4131K230M

TP1-4131K230M (Sip. No. 084255)

Safety switch TP, cable entry M20 x 1.5, without contacts for the door position, increased vertical overtravel

  • 3 x cable entry M20 x 1.5
  • Without contacts for the door position
  • Auxiliary release
  • Additional increased overtravel for vertical approach direction
  • Closed-circuit current principle
TP1-4131K230M (Sip. No. 084255)

Açıklama

Approach direction

Horizontal and vertical

Can be adjusted in 90° steps

Increased overtravel for horizontal and vertical approach directions

If increased play is required when the door is closed, an actuator with overtravel is available. With this actuator the door can move slightly in the actuating direction when closed. This is important, for example, if safety doors have a rubber end stop. Using an actuator with overtravel, the continuous pressure from the compressed rubber can be reduced. In this way the load is reduced on the switch head and the door mechanism.

Guard locking principle

Power to unlock: On a guard with guard locking based on the closed-circuit current principle, the guard is locked by spring force until the guard locking solenoid is supplied with power. Unlocking is by solenoid force. The term mechanical guard locking is also used.

Switching element

4131

Slow-action switching contact

Contacts for guard locking: 2 positively driven contacts + 2 NO contact

Auxiliary release

The auxiliary release on the front makes it possible to access the machine if there is a malfunction, e.g. a power failure. Unlocking is performed using a tool or a key. The auxiliary release must be protected against misuse (sealing, lacquer).

Accessories required

Actuator is not included.

Schaltfunktion
Schaltfunktion
Maßzeichnung
Maßzeichnung
Wiring diagram 4131 (without door monitoring contact)
Wiring diagram 4131 (without door monitoring contact)
Electromechanical safety switches in use

Functional drawings

Functional drawings

Dimensional drawings

Dimensional drawings
1Auxiliary release
2Locking screw

Connection examples

Connection examples
square_grey_light.epsSolenoid monitoring

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00971/20CCC2024010305643586_SafetySwitch T_STc_UL_us_E155795_2/1

Electrical connection values

Power consumption 11 W
Connection cross section 0.34 ... 1.5 mm²
Rated insulation voltage Ui 250 V
Rated impulse voltage Uimp 2.5 kV
Utilization category
DC-13 4 A 24 V
AC-15 4 A 230 V
Short circuit protection according to IEC 60269-1 4A gG
Solenoid operating voltage
AC 230 V -15% ... +10%
Solenoid duty cycle 100 %
Switching voltage
min. at 10 mA 12 V
Switching current
min. at 24 V 1 mA
thermal rated current Ith 4 A

Mechanical values and environment

Approach speed max. 20 m/min
Connection type
3 x M20 x 1.5
Number of guard lock monitoring NO contacts 2
Number of guard lock monitoring positively driven contacts 2
Extraction force 20 N
Actuation frequency max. 1200 1/h
Actuating force 10 N
Installation orientation any
Mechanical life 1 x 10⁶
Retention force 10 N
Switching principle Slow-action switching contact
Degree of protection IP67
Ambient temperature -20 ... +55 °C
Material
Housing Reinforced thermoplastic
Contact Silver alloy, gold flashed
Locking force Fmax 1300 N
Locking force FZh 1000 N
Guard locking principle Closed-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Monitoring of guard locking3x10620 y
Important! Values valid at DC-13 100 mA/24V


PLMaximum SILCategoryMission time
Control of guard lockingDepending on external control of guard locking20 y


In combination with actuator ACTUATOR-P-GT

Horizontal overtravel 2 mm
Vertical overtravel 1.5 mm

In combination with actuator ACTUATOR-P-GNT

Horizontal overtravel 7 mm
Vertical overtravel 7 mm

Aksesuar

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 6,0 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 084255
Makale adı TP1-4131K230M
Ağırlık 0,5kg
Gümrük sınıfı 85365019000
ECLASS 27-27-26-03 Safety switch with guard control