Safety switch CET-AP
Benefits for you
- Safety switch with guard locking and safe guard lock monitoring
- Integrated CES-AP electronics
- A special evaluation unit is not required
- Safety category 4 and PL e according to EN ISO 13849-1 in any installation orientation, head downward/upward/horizontal
- Two safe semiconductor outputs and monitoring output OUT
- Safety outputs with pulsing
- Input (optional) for the connection of feedback loop and start button
Design and functionality
The CET-AP forms a complete safety solution (PL e according to EN ISO 13849-1). Depending on the version a start button and feedback loop can be connected. As a result, the CET-AP includes everything that is necessary to secure a guard. It could not be easier!
Connection to safe control systems or safety relays
Do not use a control system or safety relay with pulsing for monitoring short circuits or switch off the pulsing function in these devices. The switch generates its own clock signals on the output lines OA/OB. A downstream device must tolerate these test pulses, which may have a length of up to 1 ms.The inputs on the downstream device must be suitable for positive-switching devices (pnp outputs), as the two outputs on the safety switch deliver a level of +24 V in the switched-on state.
Connection to decentralized peripheral systems (e.g. ET200pro)
Switches of series CET-AP-...-SI-... (2x plug connectors M12) have a special pin assignment that makes possible direct connection to decentralized peripheral systems, e.g. Siemens ET200pro.OUT output
The semiconductor output OUT is switched if the guard is closed (actuator in the actuating range). It is not allowed to be used for safety functions. The OUT outputs on the individual switches can, however, not be polled if connected in series using a Y-distributor.Evaluation is possible only on parallel wiring to the control cabinet.
RST input
The switches in a chain in a fault state can be reset using the RST input. To do this, a voltage of 24 V is applied to the RST input for at least 3 seconds. It is not necessary to disconnect the power supply to reset a fault.Ürün Bulucu
Ürünler (20)
Sonuç bulunamadı

124601
CET3-AP-CRA-AH-50F-SA-124601
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, escape release
CET3-AP-CRA-AH-50F-SA-124601
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, escape release
- Closed-circuit current principle
- Unicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin
- Escape release, 75 mm long

119106
CET3-AP-CRA-AH-50F-SH-C2312-119106
Non-contact safety switch CET-AP-..., with plug connector RC18 and escape release
CET3-AP-CRA-AH-50F-SH-C2312-119106
Non-contact safety switch CET-AP-..., with plug connector RC18 and escape release
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M23 (RC18)
- Unicode
- Door monitoring output
- Indication of the door position by LED
- Teach-in input
- Escape release, 105 mm long
- Approach direction A (delivery state)

114073
CET3-AP-CRA-AH-50F-SI-114073
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, escape release, for connection to decentralized peripheral system
CET3-AP-CRA-AH-50F-SI-114073
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, escape release, for connection to decentralized peripheral system
- Closed-circuit current principle
- Unicode
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems
- Escape release, 75 mm long

157408
CET3-AP-CRA-AH-50F-SI-C2312-157408
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, escape release, for connection to decentralized peripheral systems
CET3-AP-CRA-AH-50F-SI-C2312-157408
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, escape release, for connection to decentralized peripheral systems
- Closed-circuit current principle
- Unicode
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems
- Escape release, 105 mm long

124594
CET3-AP-CRA-AH-50F-SI-C2438-124594
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, escape release, for connection to decentralized peripheral systems
CET3-AP-CRA-AH-50F-SI-C2438-124594
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, escape release, for connection to decentralized peripheral systems
- Closed-circuit current principle
- Unicode
- Monitoring output door position OUT D
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems
- Escape release, 75 mm long

122398
CET3-AP-CRA-AH-50X-SA-122398
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET3-AP-CRA-AH-50X-SA-122398
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Closed-circuit current principle
- Unicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin

122406
CET3-AP-CRA-AH-50X-SA-122406
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET3-AP-CRA-AH-50X-SA-122406
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Closed-circuit current principle
- Unicode
- Monitoring output diagnosis DIA
- Monitoring output door position OUT D
- Plug connector M12, 8-pin

161524
CET3-AP-CRA-AH-50X-SF-161524
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET3-AP-CRA-AH-50X-SF-161524
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Closed-circuit current principle
- Unicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin
- Plug connector(s) can be rotated through 360

111346
CET3-AP-CRA-AH-50X-SI-111346
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
CET3-AP-CRA-AH-50X-SI-111346
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
- Closed-circuit current principle
- Unicode
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems

121367
CET3-AP-CRA-AH-50X-SI-C2290-121367
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, wire front release (bowden), for connection to decentralized peripheral systems
CET3-AP-CRA-AH-50X-SI-C2290-121367
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, wire front release (bowden), for connection to decentralized peripheral systems
- Closed-circuit current principle
- Unicode
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems
- Wire front release (bowden), 5 m

124589
CET3-AP-CRA-AH-50X-SI-C2438-124589
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
CET3-AP-CRA-AH-50X-SI-C2438-124589
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
- Closed-circuit current principle
- Unicode
- Monitoring output door position OUT D
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems

157287
CET3-AP-CRA-CH-50F-SA-C2312-157287
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, escape release
CET3-AP-CRA-CH-50F-SA-C2312-157287
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, escape release
- Closed-circuit current principle
- Multicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin
- Escape release, 105 mm long

121579
CET3-AP-CRA-CH-50X-SA-121579
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET3-AP-CRA-CH-50X-SA-121579
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Closed-circuit current principle
- Multicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin

122409
CET3-AP-CRA-CH-50X-SA-122409
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET3-AP-CRA-CH-50X-SA-122409
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Closed-circuit current principle
- Multicode
- Monitoring output diagnosis DIA
- Monitoring output door position OUT D
- Plug connector M12, 8-pin

122415
CET4-AP-CRA-AH-50X-SA-122415
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET4-AP-CRA-AH-50X-SA-122415
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Open-circuit current principle
- Unicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin

112082
CET4-AP-CRA-AH-50X-SI-112082
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
CET4-AP-CRA-AH-50X-SI-112082
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
- Open-circuit current principle
- Unicode
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems

126763
CET4-AP-CRA-AH-50X-SI-C2438-126763
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
CET4-AP-CRA-AH-50X-SI-C2438-126763
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems
- Open-circuit current principle
- Unicode
- Monitoring output door position OUT D
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems

161577
CET4-AP-CRA-AH-50X-SI-C2509-161577
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, wire front release (bowden), for connection to decentralized peripheral systems
CET4-AP-CRA-AH-50X-SI-C2509-161577
Safety switch with guard locking CET-AP-..., RFID, plug connector M12, wire front release (bowden), for connection to decentralized peripheral systems
- Open-circuit current principle
- Unicode
- Monitoring output door position OUT D
- 2 x plug connector(s) M12, 5-pin
- for connection to decentralized peripheral systems
- Wire front release (bowden), 3 m, automatic return

161178
CET4-AP-CRA-CH-50F-SA-161178
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, escape release
CET4-AP-CRA-CH-50F-SA-161178
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, escape release
- Open-circuit current principle
- Multicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin
- Escape release, 75 mm long

122413
CET4-AP-CRA-CH-50X-SA-122413
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
CET4-AP-CRA-CH-50X-SA-122413
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12
- Open-circuit current principle
- Multicode
- Monitoring output guard locking OUT
- Monitoring output door position OUT D
- Plug connector M12, 8-pin