AnasayfaProductsTransponder-coded safety switches with guard lockingCTMCTM-ASCTM-I2-AS2B-U-AZ-SJ-171319

CTM-I2-AS2B-U-AZ-SJ-171319 (Sip. No. 171319)

Safety switch CTM-AS – with AS-i connection, plug connector M12 (open-circuit current principle)

  • Guard locking only suitable for process protection: The safety outputs are switched on when the door is closed.
  • Locking force up to 1000 N
  • Up to category 4 / PL e according to EN ISO 13849-1
  • Actuating/extraction/retention force: 35/30/15 N
  • Auxiliary release
  • Unicode
CTM-I2-AS2B-U-AZ-SJ-171319 (Sip. No. 171319)

Açıklama

Guard locking type

CTM-I2

Open-circuit current principle: Guard locking by control of AS-i output 0 and release by spring force.

Control of the guard locking solenoid

The guard locking solenoid can be controlled via AS-Interface bus bit D0 or via the auxiliary power.

AS-Interface inputs

D0, D1, D2, D3

Door monitoring

Evaluation is performed via a safety monitor.

AS-Interface outputs

D0

Guard locking

LED function display

  • The ASI LED indicates the state of the ASi bus.
  • The LOCK LED indicates the state of the guard locking.
  • The STATE/DIA LED indicates the state of the switch and possible errors.

Auxiliary release

This is used for releasing the guard locking with the aid of a tool. The auxiliary release must be sealed to prevent tampering (for example with sealing lacquer).

Dimension drawing
Dimension drawing
Connector assignment
Connector assignment
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings
1LEDs
2Active read head face
3Auxiliary release

Connection examples

Connection examples
View of plug side

Connection examples

Connection examples

Teknik Veriler

Approvals

EAC_RU C-DE.MO05.B.00971/20Asi Interface_136101_CTM

Workspace

Repeat accuracy R 10 %

Electrical connection values

ASI operating current max. 50 mA
AS-Interface auxiliary voltage 20.4 ... 24 ... 26.4 V
Auxiliary current AS-Interface 650 mA
AS-Interface protocol ASi-3
ASI data out D0 = control of guard locking
ASI data in D0, D1 = door position, D2, D3 = guard locking
AS-Interface slave type ID-Code: B, EA-Code: 7
ASI voltage 26.5 ... 30 ... 31.6 V
EMC protection requirements Acc. to EN IEC 60947-5-3
Solenoid duty cycle 100 %
Switching load DC 24V, UL Class 2 (alternatively, see operating instructions)
Safety class III
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Anfahrgeschwindigkeit max. 20 m/min
Connection type Plug connector M12, 4-pin
Extraction force 30 N
Ready delay 3 s
Actuating force 35 N
Installation orientation any
Switching frequency max. 0.25 Hz
Storage temperature -25 ... 70 °C
Mechanical life 1 x 10⁶
Overtravel 2 mm
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP65/IP67 (In the inserted and screwed tight state)
Ambient temperature
at UB = 24 V DC -20 ... 60 °C
Material
Seals Fluorinated rubber (FKM)
Safety switch housing Reinforced thermoplastic
Locking force Fmax 1300 N
Locking force FZh 1000 N
Guard locking principle Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

PLMaximum SILPFHDCategoryMission time
Monitoring of the guard positionPL e34.83x10-9420 y


Miscellaneous

Notices for UL approval Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 3,2 MB)

Tek Belgeler

Diğer Belgeler

Sipariş verileri

Sip. No. 171319
Makale adı CTM-I2-AS2B-U-AZ-SJ-171319
Ağırlık 0,26kg
Gümrük sınıfı 85365019
ECLASS 27-27-24-05 Safety-related transponder switch with guardlocking