EUCHNER – More than safety.
EUCHNER – More than safety.

EGT2-2000 (Rend. sz. 001864)

Precision single hole fixing limit switch EGT2

  • With snap-action switching element
  • Plunger material stainless steel
  • Any installation orientation
EGT2-2000 (Rend. sz. 001864)

Ismertetés

Switching element

Snap-action switching contact, 1 NC contact and 1 NO contact

Single hole fixing limit switches must not be used as an end stop.

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram

Dimension drawing

Dimension drawing

Wiring diagram

Wiring diagram

Műszaki adatok

Engedélyezések

Zulassung EACZulassung DNV GLZulassung CCC

Mechanikai értékek és környezet

Design Thread M18 x 1.5
Housing material
Sleeve Brass, nickel-plated
Threaded section Brass, nickel-plated
Ambient temperature -5 ... 60 °C
Degree of protection IP67
Mechanical life 1 x 106
Contact material Fine silver gold-plated
Switching principle Snap-action switching contact
Repeat accuracy (absolute) ±0,01 mm (On axial actuation in the retracted state after approx. 2000 operating cycles)
Installation orientation Any
Number of NC contacts 1
Number of NO contacts 1
Connection PUR cable (Five-core)
Cable length 2 m
Approach speed 0,01 ... 10 m/min
Actuating element Ball plunger (Short)
Actuating force
Approx. 24 N

Elektromos csatlakoztatási értékek

Utilization category acc. to EN 60947-5-1
AC-15 2A 230V
DC-13 1A 24V
Short circuit protection according to IEC 60269-1 2A gG
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 2,5 kV
Switching voltage
min. 12 V
Switching current
Min. at 24V 10 mA
Connection cross-section 0,75 mm²

Műszaki támogatás

Műszaki támogatás
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER Magyarország Kft.
+36 1919 0855
info(at)euchner.hu