EUCHNER – More than safety.
EUCHNER – More than safety.
KezdőlapProductsCIT3APL1N30-STA

CIT3APL1N30-STA (Rend. sz. 071900)

Read-only head CIT3A with parallel interface, plugged in axially

CIT3APL1N30-STA (Rend. sz. 071900)

Ismertetés

Attention:

On the use of a screened cable the connecting cable is allowed to be max. 50 m long.

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram

Dimension drawing

Dimension drawing
sRead distance
mCenter offset
1)Clear zone
1LED
2Active face

Wiring diagram

Wiring diagram

Műszaki adatok

Engedélyezések

Richtlinie CE

Mechanikai értékek és környezet

Housing material
Housing CuZn, nickel-plated
Ambient temperature 0 ... 50 °C
Degree of protection IP67
Mounting method Surface
Connection M12 plug, 8-pin, axial connection (The screen on the connection cable is connected to the read head's housing via the knurled nut on the M12 plug connector.)

Elektromos csatlakoztatási értékek

Operating voltage DC 20 ... 28 V DC (All the electrical connections must either be isolated from the mains supply by a safety transformer according to IEC/EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent isolation measures.)
Current consumption 110 ... 150 mA Without load
Switching current -30 ... +30 mA Per output
Type of output Push-Pull
Resistance 4,5 kΩ Input resistance
Output voltage
min.Ub - 3 V DC For HIGH level
max.2 V DC For LOW level
Input voltage
min.15 V DC SKIP input HIGH level
max.2 V DC SKIP input LOW level

Interfész, buszrendszer

Data interface 4 bit binary coded + strobe

In combination with Data carrier CIS3AP50X50SH16YSNOU, CIS3AP50X50SH16YSNOP

Mechanical values and environment

Approach speed
At 25°C, read distance s=12mm, center offset m=0mm for 4 hexadecimal digits max.12 m/min (Reduction for each additional hexadecimal digit (at sL = 12 mm and mL = 0 mm) 1.5 m/min)

Actuating range

Read distance
At 25°C, center offset m=0mm 7 ... 12 ... 20 mm (It is necessary to maintain the minimum distance on the approach of the data carrier from the side if the data must be transferred correctly to the read head in one transmission.)

In combination with Data carrier CIS3P16D08KH16YSNOU, CIS3P16D08KH16YSNOP

Actuating range

Center offset
At 25°C, read distance s=12mm -11 ... 11 mm

Letöltések

Műszaki támogatás

Műszaki támogatás
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER Magyarország Kft.
+36 1919 0855
info(at)euchner.hu