Precision single hole fixing limit switch EGT12
- With reed contact and protective diode
- Plunger material stainless steel
- Any installation orientation
Ismertetés
Switching element
Reed contact, 1 NC contact
Never switch incandescent lamps. Not even for test purposes. Single hole fixing limit switches must not be used as an end stop.
Dimension drawing
Wiring diagram
Műszaki adatok
Engedélyezések
Mechanikai értékek és környezet
| Cable ambient temperature (static) | -25 ... 80 °C |
| Design | Thread M12 x 1 |
| Housing material | |
| Sleeve | Plastic |
| Threaded section | Stainless steel |
| Degree of protection | IP68 |
| Mechanical life | 30 x 106 |
| Contact material | Rhodium |
| Switching principle | Reed contact |
| Repeat accuracy (absolute) | ±0,01 mm (On axial actuation in the retracted state after approx. 2000 operating cycles) |
| Installation orientation | Any |
| Number of NC contacts | 1 |
| Connection | PUR cable (Two-core) |
| Cable length | 5 m |
| Approach speed | 0,01 ... 8 m/min |
| Actuating element | Domed plunger (Short) |
| Actuating force | |
| Approx. | 16 N |
Elektromos csatlakoztatási értékek
| Utilization category acc. to EN 60947-5-1 | |
| DC-13 | 0.3A 24V |
| AC-12 | 0.3A 30V |
| Short circuit protection according to IEC 60269-1 | 0.4A gG |
| Rated insulation voltage Ui | 50 V |
| Switching voltage | |
| min. | 1 V |
| Switching current | |
| Min. at 24V | 1 mA |
| Connection cross-section | 0,5 mm² |
Letöltések
Catalogs
Position Switches and Multiple Limit Switches
Dok. sz.
Változat
Nyelv
Méret
Position Switches and Multiple Limit Switches
Dok. sz.
157836
Változat
01-03/18
Nyelv
Méret
4,1 MB
Interrupteurs de position et boîtiers multipistes
Dok. sz.
157837
Változat
01-03/18
Nyelv
Méret
4,1 MB
Positionsschalter und Reihengrenztaster
Dok. sz.
157835
Változat
01-03/18
Nyelv
Méret
4,1 MB
