Evaluation unit CMS-E-BR, 1 safety contact, 1 auxiliary contact, 1 feedback loop can be connected
- 4 read heads can be connected
- 1 safety contact
- 1 auxiliary contact
- 1 feedback loop can be connected

Ismertetés
Functional description
The evaluation unit CMS-E-BR is suitable for the direct connection of up to 4 read heads.
Category/PL according to EN ISO 13849-1
- Category 4/PL e with only one read head connected
- Max. category 3/PL d with more than one read head connected
Notice:
At low approach speeds in the z direction, the time offset when switching the reed contacts must not be more than 150 ms.
Dimension drawings

Connection examples

Műszaki adatok
Approvals




Controls and indicators
LED indicator | 1 indicator LED Power (UB), green, 1 LED safety output (OUT, green/red, 8 LED status indicators (Dx1/Dx2/green/red) |
Electrical connection ratings
Breaking capacity (VA) | |||||||||||||
Safety contact 13/14 | max. 750 VA | ||||||||||||
Connection cross-section | 0.14 ... 2.5 mm² | ||||||||||||
Current consumption | 250 mA | ||||||||||||
Fusing | |||||||||||||
Protection internal (operating voltage UB) | 0.5 A Automatically resetting fuse PTC | ||||||||||||
Safety contacts 13/14 | 3A gG (External contact fuse (safety circuit) acc. to EN IEC 60269-1) | ||||||||||||
Rated insulation voltage Ui | |||||||||||||
AC | 250 V | ||||||||||||
Operating voltage | |||||||||||||
AC/DC | 24 V -10% ... +10% (All the electrical connections must either be isolated from the mains supply by a safety transformer according to EN 61558-2-6 with limited output voltage in the event of a fault, or by other equivalent insulation measures.) | Outputs | |||||||||||
| |||||||||||||
Switching current | |||||||||||||
Safety contact 13/14 | 13 ... 3000 mA at CD 24V | ||||||||||||
Switching voltage | |||||||||||||
Safety contact 13/14 | max. AC 250 V | ||||||||||||
Utilization category | |||||||||||||
AC-15 | 1A, 250V; 1A 24V (max. switching current per contact) | ||||||||||||
DC-13 | 3A, 24V (max. switching current per contact) | ||||||||||||
AC-1 | 3A, 250V; 3A , 24V (max. switching current per contact) | ||||||||||||
Risk time according to EN 60947-5-3 | max. 20 ms | ||||||||||||
Switching load | |||||||||||||
According to UL class 2 | Input: 24 V AC/DC; output: 30 V AC, 24 V DC | ||||||||||||
Degree of contamination (external, according to EN 60947-1) | 2 |
Mechanical values and environment
Approach direction | Z (If the approach speed is low, the approach direction Z should be avoided.) |
Number of read heads | up to 4 read heads |
Connection | Connection terminals, plug-in |
Degree of protection | Terminals IP20 / housing IP40 |
Material | |
Housing | Polycarbonate (PC) |
Mechanical life | 30 x 10⁶ |
Mounting type | Mounting rail 35 mm according to DIN EN 60715 TH35 |
Ambient temperature | 0 ... +50 °C |
Reliability values acc. to EN ISO 13849-1
Number of switching cycles | |
≤ 3A at 24V DC | max. 9000 1/y |
≤ 1A at 24V DC | max. 18500 1/y |
≤ 0.1A at 24V DC | max. 100000 1/y |
Mission time | 20 y (This value is dependent on the number of switching cycles and the switching current) |
Monitoring of the guard position with 1 read head | |
Category | 4 (This value is dependent on the number of switching cycles and the switching current.) |
Performance Level | PL e (This value is dependent on the number of switching cycles and the switching current.) |
PFHD | 2.5 x 10-8 (This value is dependent on the number of switching cycles and the switching current.) |
Monitoring of the guard position with >1 read head | |
Category | 3 (This value is dependent on the number of switching cycles and the switching current.) |
Performance Level | PL d (This value is dependent on the number of switching cycles and the switching current. This value applies to cables laid with protection. The following applies if cables are laid without protection and more than one door must be opened frequently or if cables are laid without protection and more than 5 doors are connected in series: Performance Level = PL c, PFHd = 1.1E-6. On this topic, also see EN ISO 14119:2014, section 8.6, and ISO TR 24119. Evaluation of the diagnostic coverage according to ISO TR 24119 must result in at least the value “low” in order to achieve PL d.) |
PFHD | 1.0 x 10-7 (This value is dependent on the number of switching cycles and the switching current. This value applies to cables laid with protection. The following applies if cables are laid without protection and more than one door must be opened frequently or if cables are laid without protection and more than 5 doors are connected in series: Performance Level = PL c, PFHd = 1.1E-6. On this topic, also see EN ISO 14119:2014, section 8.6, and ISO TR 24119. Evaluation of the diagnostic coverage according to ISO TR 24119 must result in at least the value “low” in order to achieve PL d) |
Miscellaneous
in compliance with | EN ISO 13849-1: 2015; EN 50178: 1997; EN ISO 14119: 2013; EN 6100-6-3: 2007; EN 60947-5-2: 2007/A1: 2012; EN 60947-5-3: 2013 |
In combination with read head CMS-R-EXM-03V, CMS-R-EXM-05V, CMS-R-EXM-SC and actuator CMS-M-EF
Assured operating distances sao | |
with center offset m=0 | min. 6 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
Assured release distance sar | max. 17 mm (The assured release distance sar corresponds to the reset distance.) |
Center offset | |
at s=3 mm read distance | 2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
In combination with read head CMS-R-CXC-03V, CMS-R-CXC-05V, CMS-R-CXC-05P, CMS-R-CXC-SC and actuator CMS-M-CA
Assured operating distances sao | |
with center offset m=0 | min. 6 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
Assured release distance sar | max. 14 mm (The assured release distance sar corresponds to the reset distance.) |
Center offset | |
at s=3 mm read distance | 2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
In combination with read head CMS-R-BXI-03V, CMS-R-BXI-05V, CMS-R-BXI-SC, CMS-R-BXI-07P and actuator CMS-M-BD
Assured operating distances sao | |
with center offset m=0 | min. 3 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
Assured release distance sar | max. 12 mm (The assured release distance sar corresponds to the reset distance.) |
Center offset | |
at s=3 mm read distance | 2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
In combination with read head CMS-R-AXH-03V, CMS-R-AXH-SC, CMS-R-AXH-05P and actuator CMS-M-AC
Assured operating distances sao | |
with center offset m=0 | min. 6 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
Assured release distance sar | max. 31 mm (The assured release distance sar corresponds to the reset distance.) |
Center offset | |
at s=3 mm read distance | 2,5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.) |
Tartozékok
CMS read heads
Letöltések
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
Other Documents
Approvals and certificates
TUEV Sued Italia
Dok. sz.
Változat
Nyelv
Méret

TUEV Sued Italia
Dok. sz.
Változat
Nyelv
Méret
4,5 MB
TUEV Süd München Z10 Zertifikat
Dok. sz.
Változat
Nyelv
Méret

TUEV Süd München Z10 Zertifikat
Dok. sz.
Változat
Nyelv
Méret
0,5 MB
c UL us
Dok. sz.
Változat
Nyelv
Méret

c UL us
Dok. sz.
Változat
Nyelv
Méret
0,2 MB
Sales documentation
Interrupteurs de sécurité à codage magnétique CMS
Dok. sz.
Változat
Nyelv
Méret

Interrupteurs de sécurité à codage magnétique CMS
Dok. sz.
090606
Változat
10-11/20
Nyelv
Méret
5,8 MB
Ordering data
Rend. sz. | 085537 |
Articlename | CMS-E-BR |
Weight | 0,331kg |
Customsclass | 85364110 |
ECLASS | 27-27-24-02 Sicherheitsgerichteter magnetischer Näherungsschalter |