TK2-4131CB024M (Rend. sz. 099691)

Safety switch TK, cable entry M20 x 1.5

  • 3 x cable entry M20 x 1.5
  • Auxiliary release on the switch head
  • Without prevention of inadvertent locking position (faulty closure protection)
  • Guard locking pin left
  • Open-circuit current principle
TK2-4131CB024M (Rend. sz. 099691)

Ismertetés

Guard locking principle

Open-circuit current (power on to lock): On a guard with guard locking based on the open-circuit current principle, the guard is locked until the power supply to the guard locking solenoid is interrupted. Unlocking is by spring force. The term electrical guard locking is also used.

Switching element

4131

Slow-action switching contact

Contacts for guard locking: 2 positively driven contacts + 2 NO contact

Auxiliary release with triangular wedge

The auxiliary release on the switch head makes it possible to access the machine if there is a malfunction, e.g. a power failure. Unlocking is performed using a tool or a key. The auxiliary release must be protected against misuse (sealing, lacquer).

Contact separation

When actuated, the contacts are opened. Guard locking is not fully unlocked. The auxiliary release must be sealed to prevent tampering (e.g. with sealing lacquer).

Without prevention of inadvertent locking position (faulty closure protection)

Safety switch TK does not have a prevention of inadvertent locking position (faulty closure protection). This must be implemented separately.

Switching function
Switching function
Dimension drawing
Dimension drawing
Wiring diagram 4131 (without door monitoring contact)
Wiring diagram 4131 (without door monitoring contact)
Electromechanical safety switches in use

Functional drawings

Functional drawings

Dimensional drawings

Dimensional drawings
1Auxiliary release on both sides
2Contact separation

Connection examples

Connection examples
square_grey_light.epsSolenoid monitoring

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20CCC2024010305643586_SafetySwitch T_STc_UL_us_E155795_2/1

Electrical connection values

Fuse max. 4 A gG
Power consumption 8 W
Connection cross section 0.34 ... 1.5 mm²
Rated insulation voltage Ui 250 V
Rated impulse voltage Uimp 2.5 kV
Utilization category
DC-13 4 A 24 V
AC-15 4 A 230 V
Solenoid operating voltage
AC/DC 24 V -15% ... +10%
Solenoid duty cycle 100 %
Switching voltage
min. at 10 mA 12 V
Switching current
min. at 24 V 1 mA
thermal rated current Ith 4 A

Mechanical values and environment

Approach direction C
Connection type
3 x M20 x 1.5
Number of guard lock monitoring NO contacts 2
Number of guard lock monitoring positively driven contacts 2
Actuation frequency max. 1200 1/h
Installation orientation any
Mechanical life 1 x 10⁶
Switching principle Slow-action switching contact
Degree of protection IP67
Ambient temperature -20 ... 55 °C
Material
Contact Silver alloy, gold flashed
Housing Reinforced thermoplastic
Locking force Fmax 5000 N
Guard locking principle Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Monitoring of guard locking2x10620 y
Important! Values valid at DC-13 100 mA/24V


Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 2,5 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 099691
Cikk neve TK2-4131CB024M
Súly 0,596kg
Vámtarifaszám 85365019000
ECLASS 27-27-26-03 Safety switch with guard control