TQ2-1211SG024-5000 (Rend. sz. 104751)

Safety switch TQ, connection cable, connecting cable 5m

  • Connecting cable, 5 m
  • Auxiliary release from 3 sides
  • Switching element 1211S
  • LED indicator
  • Open-circuit current principle
TQ2-1211SG024-5000 (Rend. sz. 104751)

Ismertetés

Approach direction

Vertical

Guard locking principle

Open-circuit current (power on to lock): On a guard with guard locking based on the open-circuit current principle, the guard is locked until the power supply to the guard locking solenoid is interrupted. Unlocking is by spring force. The term electrical guard locking is also used.

Guard locking for process protection

The safety switch meets the requirements for interlocking devices with guard locking for process protection. It does not possess safe guard lock monitoring.

Switching element

1211S

Slow-action switching contact

Contacts for guard locking: 1 NC contact 1 NO contact

Contacts for door monitoring: 2 positively driven contacts + 1 NO contact

LED indicator

The LED indicator illuminates when voltage is applied to the guard locking solenoid.

Auxiliary release with triangular wedge

The auxiliary release makes it possible to access the machine if there is a malfunction, e. g. a power failure. Unlocking is performed using a tool or a key. The auxiliary release must be protected against misuse (sealing, lacquer).

Scope of delivery

Triangular key for manual release is included in the scope of delivery.

Accessories required

Actuator is not included.

Dimension drawing
Dimension drawing
Wiring diagram 1211S
Wiring diagram 1211S

Dimensional drawings

Dimensional drawings
1Triangular key

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20TÜV Süd München_B 40393 0023c_UL_us_E93776_9

Electrical connection values

Fuse max. 2 A gG
Power consumption 2.7 W
Rated insulation voltage Ui 300 V
Rated impulse voltage Uimp 2.5 kV
Utilization category
DC-13 Monitoring contact 0.22 A 125 V
AC-15 Monitoring contact 1 A 125 V
AC-15 Safety contact 0.75 A 250 V
DC-13 Safety contact 0.27 A 250 V
Solenoid operating voltage
DC 24 V -15% ... +10%
Solenoid duty cycle 100 %
Switching voltage
min. at 10 mA 12 V
Switching current
min. at 24 V 1 mA
thermal rated current Ith 2.5 A

Mechanical values and environment

Approach speed 3 ... 60 m/min
Connection type Connecting cable, 5 m
Number of guard lock monitoring NC contacts 1
Number of door position NO contacts 1
Number of guard lock monitoring NO contacts 1
Number of door position positively driven contacts 2
Extraction force 10 N
Actuation frequency max. 900 1/h
Actuating force 5 N
Installation orientation any
Insertion depth 26.3 mm
Mechanical life 1 x 10⁶
Retention force 1 N
Switching principle Slow-action switching contact
Degree of protection IP67
Ambient temperature -20 ... 50 °C
Material
Contact Silver alloy, gold flashed
Housing Reinforced thermoplastic
Locking force Fmax 500 N
Guard locking principle Open-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Monitoring of the guard position2x10620 y
Important! Values valid for DC-12 100 mA/24V


In combination with actuator ACTUATOR-Q-WTB

Horizontal overtravel 1.3 mm

In combination with actuator ACTUATOR-Q-GT, HINGED ACTUATOR-Q-RO, HINGED ACTUATOR-Q-LU, ACTUATOR-Q-WT

Horizontal overtravel 1.9 mm

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 3,2 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 104751
Cikk neve TQ2-1211SG024-5000
Súly 0,577kg
Vámtarifaszám 85365019000
ECLASS 27-27-26-03 Safety switch with guard control