KezdőlapProductsMagnetically coded safety switchesRead heads CMS with reed contactsCMS-R-AZA-ST0,2VL

CMS-R-AZA-ST0,2VL (Rend. sz. 106738)

Read heads, design A, for ESM, PVC, plug connector M12

  • In combination with evaluation units ESM-BA...
  • Cube-shaped version, 88 x 25 mm
  • Plug connector M12
  • 1 LED
  • Cable type: PVC
CMS-R-AZA-ST0,2VL (Rend. sz. 106738)

Ismertetés

Alignment of read head and actuator

Operating diagram, design A

CMS-R-AZA

<p>CMS-R-AZA</p>
  • Typ. operating distance
  • Typ. release distance
Dimension drawing
Dimension drawing
Connector assignment
Connector assignment
Circuit diagram CMS-R-AZA… (not actuated)
Circuit diagram CMS-R-AZA… (not actuated)

Dimensional drawings

Dimensional drawings
1Active face
2Actuator
3Center offset m at s=3 mm
4Sao
5Assured operating distance
6LED

Connection examples

Connection examples

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20c_UL_us_E155795_5/2

Electrical connection values

Fuse
Power supply / safety contacts, external contact protection Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
rated conditional short-circuit current 100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Electrical switching frequency
at I_min = 10 mA max. 5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
At nominal current 8 A max. 0.1 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Switching voltage
24 ... 35 V (DC)
Contact status indication 24 ... 35 V (DC)
Switching voltage according to UL
according to UL Class 2 max. 24 V AC/DC
Switching current
DC max. 100 mA
Contact status indication (DC) max. 15 mA
Switching delay from state change max. 26 ms
LED series resistance
LED contact status indication 1.5 kΩ

Mechanical values and environment

Connection type hard-wired encapsulated cable with plug connector M12
Number of LED displays 1 LED contact status indication
Number of NO contacts 2 NO contacts with fuse, 100 mA each, and 1 NO contact with LED
Tightening torque 0.4 ... 0.5 Nm
Design A
Installation orientation any
Storage temperature -25 ... 70 °C
Cable length 0.2 m
Mechanical life 100 x 10⁶
Degree of protection IP67
Ambient temperature -20 ... 60 °C
Material
Housing Fiber glass reinforced PPS
Cable material PVC
Method of operation magnetic, reed contact

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Monitoring of the guard position
B10D 20 x 10⁶

Miscellaneous

in compliance with EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; IEC 60947-5-3: 2013

In combination with read head ESM-BA201, ESM-BA202, ESM-BA203, ESM-BA301, ESM-BA302, ESM-BA303, ESM-BA201P, ESM-BA301P and actuator CMS-M-AI

Secured switch-off distance sar
max. 20 mm (The assured release distance s_ar corresponds to the reset distance.)
Contact status indication with LED max. 15 mm (in approach direction X, center offset m = 0)
Secured switching distance sao
Contact status indication with LED min. 7 mm (in approach direction X, center offset m = 0)
with center offset m=0 min. 9 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
Center offset
at s = 3 mm read distance 2.5 mm (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 4,1 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 106738
Cikk neve CMS-R-AZA-ST0,2VL
Súly 0,094kg
Vámtarifaszám 85389099990
ECLASS 27-27-24-02 Safety-related magnetic proximity switch