STA3A-4131A024-10C-DCXC1993 (Rend. sz. 114486)

Safety switch STA, plug connector BHA (MR10), contacts for the door position

  • Plug connector BHA (MR10)
  • Contacts for the door position
  • Escape release, long
  • Closed-circuit current principle
STA3A-4131A024-10C-DCXC1993 (Rend. sz. 114486)

Ismertetés

Approach direction

Horizontal and vertical

Can be adjusted in 90° steps

Increased overtravel for horizontal approach direction

If increased play is required when the door is closed, an actuator with overtravel is available. With this actuator the door can move slightly in the actuating direction when closed. This is important, for example, if safety doors have a rubber end stop. Using an actuator with overtravel, the continuous pressure from the compressed rubber can be reduced. In this way the load is reduced on the switch head and the door mechanism.

Guard locking principle

Power to unlock: On a guard with guard locking based on the closed-circuit current principle, the guard is locked by spring force until the guard locking solenoid is supplied with power. Unlocking is by solenoid force. The term mechanical guard locking is also used.

Switching element

4131

Slow-action switching contact

Contacts for guard locking: 2 positively driven contacts + 2 NO contact

Escape release

This is used for manual release of guard locking from the danger zone without tools.

Accessories required

Actuator is not included.

Schaltfunktion
Schaltfunktion
Maßzeichnung
Maßzeichnung
Wiring diagram
Wiring diagram
Wiring diagram 4131
Wiring diagram 4131
Electromechanical safety switches in use

Functional drawings

Functional drawings

Dimensional drawings

Dimensional drawings
1Escape release (basic position)
2Unlocked
3Plug connector aligned
4Screw plug M20x1.5 (2x)

Connection examples

Connection examples

Connection examples

Connection examples
square_grey_dark.epsDoor monitoring
square_grey_light.epsSolenoid monitoring

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20CCC2024010305643586_SafetySwitch T_ST

Electrical connection values

Power consumption 8 W
Rated insulation voltage Ui 50 V
Rated impulse voltage Uimp 2.5 kV
Utilization category
DC-13 4 A 24 V
AC-15 4 A 50 V
Short circuit protection according to IEC 60269-1 4A gG
Solenoid operating voltage
AC/DC 24 V -15% ... +10%
Solenoid duty cycle 100 %
Switching voltage
min. at 10 mA 12 V
Switching current
min. at 24 V 1 mA
thermal rated current Ith 4 A

Mechanical values and environment

Approach speed max. 20 m/min
Approach direction A
Connection type
1 x Plug connector BHA10 (9-pin + PE)
Number of door position NO contacts 1
Number of guard lock monitoring NO contacts 1
Number of guard lock monitoring positively driven contacts 2
Extraction force 30 N
Actuation frequency max. 1200 1/h
Actuating force 35 N
Installation orientation any
Insertion depth 24.5 mm
Mechanical life 1 x 10⁶
Retention force 20 N
Switching principle Slow-action switching contact
Degree of protection IP65
Ambient temperature -20 ... +80 °C
Material
Housing Alloy - die-cast
Contact Silver alloy, gold flashed
Locking force Fmax 3000 N
Locking force FZh 2300 N
Guard locking principle Closed-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Monitoring of guard locking1.15x10720 y
Important! Values valid at DC-13 100 mA/24V


PLMaximum SILCategoryMission time
Control of guard lockingDepending on external control of guard locking20 y


Miscellaneous

C number
C1993 Escape release long

In combination with actuator ACTUATOR-S-GT-SN

Overtravel 5 mm

Tartozékok

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 6,3 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 114486
Cikk neve STA3A-4131A024-10C-DCXC1993
Súly 0,782kg
Vámtarifaszám 85365019000
ECLASS 27-27-26-03 Safety switch with guard control