EUCHNER – More than safety.
EUCHNER – More than safety.
KezdőlapProductsEnabling switchZSM with numerous control functionsZSM2204-117128

ZSM2204-117128 (Rend. sz. 117128)

ZSM, LED, + and - buttons, vibration motor, stop command device, black pushbutton, straight connecting cable, 10 m

  • 3-stage function
  • Stop command device
  • Vibration signal optional
  • LED indicator
  • Pushbutton black
  • + and – buttons
  • Straight connecting cable, 10 m
ZSM2204-117128 (Rend. sz. 117128)

Ismertetés

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Stop command device

Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.

Lower position, protected by anti-kink strain relief in case of a fall.

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

Pushbutton black

This button can be configured individually. For reset function directly from the enabling switch, for example.

+ and – buttons

These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.

Cable

The high-quality connecting cables are available in a straight version.

Dimension drawing
Dimension drawing
Switching function
Switching function
Wiring diagram
Wiring diagram
Function sequence
Function sequence

Dimensional drawings

Dimensional drawings
1Cable end sleeves bew

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00972/20c_UL_us_E206093_4/1

Operating and display elements

ItemColorExtrasSwitching elementNote slide-in labelSlide-in labelVersionNumberDesignation1LED
+ button1
LED red/green1
Vibration motor1
- button1
Emergency stop device1
blackPushbutton1

Electrical connection values

Connecting cable 23x0.14 mm² (screened)
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 50 V
Rated impulse withstand voltage Uimp 0.5 kV
Utilization category
DC-13 24 V 0.3 A (For additional controls)
DC-13 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13 24 V 0.01 A (For additional indicators)
Short circuit protection according to IEC 60269-1 2A gG (In case of operating voltages other than 24 V, the short circuit protection must be dimensioned accordingly and checked.)
Switching characteristics 3-stage enabling switch
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Connection type flying lead
Number of changeover contacts 3 (Connection as per block diagram)
Cable length
straight 10 m
Mechanical life 1 x 10⁶
Switching principle Snap-action contact element
Degree of protection IP54
Ambient temperature -5 ... +60 °C
Material PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Emergency stop
B10D 0.1 x 10⁶
Enabling switch
B10D 0.1 x 10⁶

Miscellaneous

in compliance with 60947-5-8

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 3,2 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 117128
Cikk neve ZSM2204-117128
Súly 1,466kg
Vámtarifaszám 85371098
ECLASS 27-37-12-38 Agreement switch

Műszaki támogatás

Műszaki támogatás
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER Magyarország Kft.
+36 1919 0855
info(at)euchner.hu