EUCHNER – More than safety.
EUCHNER – More than safety.
KezdőlapProductsMagnetically coded safety switchesRead heads CMS with reed contactsCMS-R-BZD-05V

CMS-R-BZD-05V (Rend. sz. 159518)

Read heads CMS, design B - with NO contact combinations, PVC

  • In combination with evaluation units ESM-BA...
  • Cube-shaped version, 36 x 26 mm
  • Connecting cable
  • Cable type: PVC
CMS-R-BZD-05V (Rend. sz. 159518)

Ismertetés

Alignment of read head and actuator

Operating diagram, design B

CMS-R-BXO

<p>CMS-R-BXO</p>
  • typ. operating distance
  • typ. release distance
Dimension drawing
Dimension drawing
CMS-R-BZD
CMS-R-BZD

Dimension drawings

Dimension drawings

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20c_UL_us_E155795_5/1

Work area

Operating distance off
Monitoring contact max. 20 mm
Operating distance on
Monitoring contact min. 6 mm

Electrical connection ratings

Fusing
Power supply / safety contacts, external contact protection Fuse 10 A gG (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
rated conditional short-circuit current 100 A (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Switching frequency, electrical
at I_min = 10 mA max. 5 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
At nominal current 8 A max. 0.1 Hz (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3..)
Switching current
Monitoring contact max. 100 mA
DC max. 100 mA
Switching voltage
Monitoring contact DC max. 35 V
DC 24 ... 35 V
Switching voltage according to UL
according to UL Class 2 max. 24 V AC/DC
Switching characteristics parallel
Switching delay from state change max. 26 ms (Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3. Corresponds to the risk time according to EN 60947-5-3. This is the maximum OFF time for the safety outputs following removal of the actuator)

Mechanical values and environment

Number of NO contacts 2 NO contacts with internal fuse, 100 mA each, 1 NO contact as monitoring contact
Connection hard-wired encapsulated cable with cable end sleeves 0.25mm2
Degree of protection IP67
Design B
Material
Housing Fiber glass reinforced PPS
Cable material PVC
Mechanical life 100 x 10⁶
Installation orientation any (During mounting it must be ensured that the marking arrows on the actuator and the read head are opposite each other.)
Tightening torque 0.4 ... 0.5 Nm
Classification according to EN IEC 60947-5-3 M3D36AS1
Cable length 5 m
Ambient temperature -20 ... +80 °C
Method of operation magnetic, reed contact

Reliability values acc. to EN ISO 13849-1

Classification according to EN IEC 60947-5-3 M3D36AS1
Monitoring of the guard position
B10D 20 x 10⁶

Miscellaneous

in compliance with EN ISO 13849-1: 2015; EN 62061: 2005 + AC: 2010 + A1: 2013 + A2: 2015; EN ISO 14119: 2013; EN 60947-5-3: 2013

In combination with read head ESM-BA201, ESM-BA202, ESM-BA203, ESM-BA301, ESM-BA302, ESM-BA303, ESM-BA201P, ESM-BA301P and actuator CMS-M-BH

Assured operating distances sao
with center offset m=0 min. 7 mm (Value applies only if there is no ferromagnetic material in the vicinity of the read head and the actuator.)
Assured release distance sar
with center offset m=0 max. 20 mm (The assured release distance s_ar corresponds to the reset distance.)
Center offset
at s=3 mm read distance 2.5 (Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator.)

Letöltések

Complete package

Download all important documents with a single click.

Content:

  • The operating instructions and any additions to the operating instructions or brief instructions
  • Any data sheets to supplement the operating instructions
  • The declaration of conformity
Download complete package (ZIP, 3,1 MB)

Single Documents

Other Documents

Ordering data

Rend. sz. 159518
Articlename CMS-R-BZD-05V
Weight 0,264kg
Customsclass 85389099

Műszaki támogatás

Műszaki támogatás
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER Magyarország Kft.
+36 1919 0855
info(at)euchner.hu