KezdőlapProductsCES-IA-BP-U-C07-SI-167008

CES-IA-BP-U-C07-SI-167008 (Rend. sz. 167008)

Complete set, non-contact safety switch CES-C07, with actuator

Safety switch with integrated evaluation electronics
Actuator included
Suitable for separate operation (no series connection)
Unicode
M12 plug connector, 5-pin (pin 5 not used)
Direct connection to IP67 field modules
2 safety outputs (semiconductor outputs)
Short circuit monitoring
Category 4 / PL e according to EN ISO 13849-1
Three active faces

CES-IA-BP-U-C07-SI-167008 (Rend. sz. 167008)

Ismertetés

Installation position

Permissible installation position

Unicode evaluation

Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

Category 4/PL e according to EN 13849-1

Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Terminal assignment

Pin	Designation	Function
1	UB	Power supply, DC 24 V
2	FO1A	Safety output, channel A
3	0V	Ground, DC 0 V
4	FO1B	Safety output, channel B
5	-	n.c.

Notice

The caps for the mounting holes are included.

CES-C07: transponder coded safety switch

Dimension drawings

1	LEDs
2	Active face
3	With the installation orientation shown: cable outlet on left or right

Connection examples

Műszaki adatok

Approvals

TUEV Süd München_Z10 040393 0031 Rev. 02

TUEV Süd München_M6A 040393 0036 Rev. 01

Switch CES-I-BP-U-C07-SI-162815 (Order no. 162815)

Work area

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection ratings

Current consumption	40 mA
Fusing
external (operating voltage)	0.25 ... 8 A
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	300 V
Rated impulse withstand voltage U_imp	1.5 kV
Operating voltage DC
U_B	24 V DC -15% ... +15% regulated, residual ripple < 5%, PELV
Turn-on time
Safety outputs	max. 100 ms
EMC protection requirements	according to EN IEC 60947-5-3
Risk time according to EN 60947-5-3
Single device	max. 125 ms
Safety class	III
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD/C
Output type	p-switching, short circuit-proof
Output voltage	UB-1.5 ... UB V DC
Switching current	1 ... 50 mA
	Safety outputs FO1A / FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Discrepancy time	max. 10 ms
Output voltage
HIGH U(FO1A) / U(FO1B)	UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
Switching current	1 ... 150 mA
Utilization category
DC-13	24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current I_r	max. 0.25 mA
Test pulses	0.3 ms (Applies to a load with C <= 30 nF and R <= 20 kohm)
Test pulse interval	ca 100 ms

Mechanical values and environment

Dimensions	40 x 26.5 x 18
Connection	M12 plug connector, 5-pin
Degree of protection	IP65/IP67/IP69/IP69K
Ready delay	5 s
Material
Housing	Plastic, PBT-PC-GF30
Operating altitude	max. 4 000 m
Installation orientation	any
Switching frequency	max. 1 Hz
Tightening torque	max. 0.8 Nm
Mounting distance
between 2 switches or 2 actuators	min. 50 mm
Mounting type	Surface mounting on metal
Shock and vibration resistance	according to EN IEC 60947-5-3
Ambient temperature
at U_B = 24 V DC	-25 ... +55 °C (+65 °C at I_L = max. 10 mA per safety output)

Reliability values acc. to EN ISO 13849-1

Mission time
according to EN ISO 13849-1	20 y
SIL CL
nach EN 62061:2005/A2:2015	3
	Monitoring of the guard position
Category
according to EN ISO 13849-1	4
Performance Level
according to EN ISO 13849-1	PL e
PFH_D
according to EN ISO 13849-1	6 x 10E^-10

Actuator CES-A-BTN-C07-156230 (Order no. 156230)

Electrical connection ratings

Power supply	inductive via read head

Power supply

inductive via read head

Mechanical values and environment

Dimensions	40 x 26.5 x 18
Degree of protection	IP65/IP67/IP69/IP69K
Material
Housing	Plastic PBT-PC-GF30
Installation orientation	active face opposite read head
Tightening torque
Fixing screws	max. 0.8 Nm
Ambient temperature	-40 ... +65 °C

Components included in the set

Included accessories	2x safety screws M4x20

Included accessories

2x safety screws M4x20

Switch CES-I-BP-U-C07-SI-162815 (Order no. 162815)

Miscellaneous

Additional feature	Caps included
The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures

Actuator CES-A-BTN-C07-156230 (Order no. 156230)

Komponensek

156230
CES-A-BTN-C07-156230
Actuator CES-A-BTN-C07

Cube-shaped design, 40 x 26.5 x 18 mm
2x safety screws M4x20 included

162815
CES-I-BP-U-C07-SI-162815
Non-contact safety switches CES-I-BP-.-C07, M12

Safety switch with integrated evaluation electronics
Suitable for separate operation (no series connection)
Unicode
M12 plug connector, 5-pin (pin 5 not used)
Direct connection to IP67 field modules
2 safety outputs (semiconductor outputs)
Short circuit monitoring
Category 4 / PL e according to EN ISO 13849-1
Three active faces

Letöltések

Complete package

Download all important documents with a single click.

Content:

The operating instructions and any additions to the operating instructions or brief instructions
Any data sheets to supplement the operating instructions
The declaration of conformity

Download complete package (ZIP, 4,1 MB)