EUCHNER – More than safety.
EUCHNER – More than safety.
KezdőlapProductsEGT12RRSEM4C1888

EGT12RRSEM4C1888 (Rend. sz. 079139)

Precision single hole fixing limit switch EGT12

  • With reed contact and protective diode
  • Plunger material stainless steel
  • Any installation orientation
EGT12RRSEM4C1888 (Rend. sz. 079139)

Ismertetés

Switching element

Reed contact, 1 NC contact

Never switch incandescent lamps. Not even for test purposes. Single hole fixing limit switches must not be used as an end stop.

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram
Wiring diagram
Wiring diagram

Dimension drawing

Dimension drawing

Wiring diagram

Wiring diagram

Wiring diagram

Wiring diagram

Műszaki adatok

Engedélyezések

Zulassung EACZulassung DNV GLZulassung c_UL_us LISTED Class 2Zulassung CCC

Mechanikai értékek és környezet

Design Thread M12 x 1
Housing material
Threaded section Stainless steel
Sleeve Brass, nickel-plated
Ambient temperature -25 ... 80 °C
Degree of protection IP67 (Mating connector inserted and screwed tight.)
Mechanical life 5 x 106
Contact material Rhodium
Switching principle Reed contact
Repeat accuracy (absolute) ±0,01 mm (On axial actuation in the retracted state after approx. 2000 operating cycles)
Installation orientation Any
Number of NC contacts 1
Connection Plug connector M12 (4-pin)
Approach speed 0,01 ... 20 m/min
Actuating element Roller plunger (Short)
Actuating force
Approx. 16 N

Elektromos csatlakoztatási értékek

Utilization category acc. to EN 60947-5-1
DC-13 0.3A 24V
AC-12 0.3A 30V
Short circuit protection according to IEC 60269-1 0.4A gG
Rated insulation voltage Ui 50 V
Switching voltage
min. 1 V
Switching current
Min. at 24V 1 mA

Letöltések

Műszaki támogatás

Műszaki támogatás
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER Magyarország Kft.
+36 1919 0855
info(at)euchner.hu