KezdőlapProductsElectromechanical safety switches with guard lockingNZ.VZ.VS metal switch without guard lock monitoringNZ1VZ-528E3VSM07-M

NZ1VZ-528E3VSM07-M (Rend. sz. 082129)

Safety switch NZ.VZ.VSM, cable entry M20 x 1.5

  • Cable entry M20 x 1.5
  • 1 pos. driven contact
  • 1 NO contacts
  • Guard locking for process protection
  • Closed-circuit current principle
NZ1VZ-528E3VSM07-M (Rend. sz. 082129)

Ismertetés

Approach direction

Horizontal

Actuating head and solenoid can each be adjusted in 90° steps

Guard locking principle

Power to unlock: On a guard with guard locking based on the closed-circuit current principle, the guard is locked by spring force until the guard locking solenoid is supplied with power. Unlocking is by solenoid force. The term mechanical guard locking is also used.

Switching element

528H

Slow-action switching contact 1 positively driven contact + 1 NO contact

Guard locking for process protection

The safety switch meets the requirements for interlocking devices with guard locking for process protection. It does not possess safe guard lock monitoring.

Accessories required

Actuator and solenoid plug are not included.

Switching function
Switching function
Dimension drawing
Dimension drawing
Wiring diagram 528H
Wiring diagram 528H
Electromechanical safety switches in use

Functional drawings

Functional drawings

Dimensional drawings

Dimensional drawings
1)In the inserted and screwed tight state
aTravel without operation: actuator is in the guide slot, but function is not triggered.
bSwitching operation completed: actuator must be inserted to this point to ensure safe switching. The actuator must be withdrawn at least to point a for switching off.

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20c_UL_us_E155795_2/1

Electrical connection values

Fuse max. 4 A gG
Connection cross section 0.34 ... 1.5 mm²
Rated insulation voltage Ui 250 V
Rated impulse voltage Uimp 2.5 kV
Utilization category
DC-13 4 A 24 V
AC-15 4 A 230 V
Solenoid operating voltage
AC 110 V -15% ... 10%
Switching voltage
min. at 10 mA 12 V
Switching current
min. at 24 V 1 mA
thermal rated current Ith 4 A

Mechanical values and environment

Anfahrgeschwindigkeit max. 20 m/min
Approach direction A
Connection type
1 x M20 x 1.5
Number of door position NO contacts 1
Number of door position positively driven contacts 1
Extraction force 40 N
Actuation frequency max. 1200 1/h
Actuating force 45 N
Installation orientation any
Insertion depth 52 mm
Storage temperature -25 ... 80 °C
Solenoid alignment 3
Mechanical life 2 x 10⁶
Retention force 35 N
Switching principle Slow-action switching contact
Degree of protection IP65
Ambient temperature -25 ... 80 °C
Material
Contact Silver alloy, gold flashed
Housing Anodized die-cast alloy
Locking force Fmax 2000 N
Locking force FZh 1500 N
Guard locking principle Closed-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Monitoring of the guard position4.5x10620 y
Important! Values valid at DC-13 100 mA/24V


In combination with actuator ACTUATOR-Z-G

Overtravel 4 mm

In combination with actuator ACTUATOR-Z-GN

Overtravel 16 mm

Tartozékok

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 4,0 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 082129
Cikk neve NZ1VZ-528E3VSM07-M
Súly 0,795kg
Global Trade Item Number (GTIN) 4047048002166
Vámtarifaszám 85365019000
ECLASS 27-27-26-03 Safety switch with guard control