RIEGEL CES-ACR1-AR-C01-AH-SA-104028 (Rend. sz. 104028)
Bolt for safety switch CES-C01
- Bolt for safety switch CES-C01
- Steel bolt
- For doors hinged on the left or right
- Detent knob in open position
- Ball detent mechanism in closed position
- Suitable for a door gap of approx. 15 mm
- Protective plate for safety switch

Ismertetés
Scope of delivery
- Bolt parts
- Safety switch
- Actuator
- Protective plate
Rastung in geöffneter Stellung
Die Rastung in geöffneter Stellung soll verhindern, dass sich Personen von innen in einer Maschine einschließen können.
Rastung in geschlossener Stellung
Riegel rastet in geschlossener Stellung und verhindert ein unbeabsichtigtes Öffnen des Riegels. Kugel- oder Federrastungen werden durch Überwinden der Federkraft geöffnet.
Türarten und Türanschlag
Geeignet für Schwenk- und Schiebetüren
Geeignet für links und rechts angeschlagene Türen
Mit Türanschlag, Tür lässt sich nach innen nicht öffnen.
Protective plate
Das Schutzblech schützt den Schalter vor Beschädigungen.
Integrated lockout bar
Mit Hilfe des integrierten Sperreinsatzes kann der Riegel in geöffneter Stellung z. B. mit Schlössern gesichert werden.
Es kann verhindert werden, dass Personen versehentlich im Gefahrenbereich eingeschlossen werden.

Dimensional drawings

1 | Safety switch mounted on switch bracket. |
2 | Protective plate mounted on switch bracket. |
3 | Changing the approach direction 1) Undo the screws M5x10 (1) 2) Undo the fixing screws on the CES-... 3) Turn the stop plate 4) Mount in the reverse order of removal |
4 | Door hinged on the left |
4) | Bolt with detent mechanism. Engages in open position. (Prevents unintentional closing of the bolt) Unlocked by pulling the detent knob upward. |
5 | safety plate |
6 | Detent mechanism against accidental opening (vibration) |
7 | Door hinged on the right |
Műszaki adatok
Mechanical values and environment
Approach direction | A or C |
Number of safety switches that can be mounted | 1 |
Escape release | Yes |
Material | |
Base plate | Galvanized steel |
Switch bracket | Steel powder-coated |
Handle | Plastic |
Guide strips | Plastic |
Miscellaneous
Detent mechanism closed position | Ball detent mechanism |
Switch CES-AR-C01-AH-SA (Order no. 098941)

Workspace
Repeat accuracy R | 10 % |
Electrical connection values
Fuse | |
external (operating voltage) | 0.25 ... 8 A |
Rated insulation voltage Ui | 75 V (Tested up to 75 V by employers' liability insurance association) |
Rated impulse voltage Uimp | 1.5 kV |
Operating voltage DC | |
UB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
Turn-on time | |
Safety outputs | max. 400 ms |
EMC protection requirements | Acc. to EN IEC 60947-5-3 |
Risk time according to EN 60947-5-3 | max. 260 ms |
Risk time according to EN 60947-5-3, extension for each additional device | max. 5 ms |
Safety class | III |
Current consumption | |
no load on outputs | max. 50 mA |
Degree of contamination (external, according to EN 60947-1) | 3 |
Monitoring output OUT | |
Output type | p-switching, short circuit-proof |
Output voltage | 0.8 x UB ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
Switching current | max. 200 mA |
Safety outputs OA / OB | |
Output type | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
LOW U(OA,OB) | 0 ... 1 V DC |
HIGH U(OA,OB) | UB-1.5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
rated conditional short-circuit current | 100 A |
Discrepancy time | max. 10 ms |
Utilization category | |
DC-13 | 24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
Off-state current Ir | max. 0.25 mA |
Switching current | |
per safety output | 1 ... 400 mA |
Test pulse duration | max. 1 ms |
Mechanical values and environment
Connection type | M12 plug connector, 8-pin |
Tightening torque | |
Fixing screws | max. 1 Nm |
Ready delay | 10 s |
Installation orientation | any |
Switching frequency | max. 1 Hz |
Mounting distance | min. 40 mm |
Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
Degree of protection | IP67 |
Ambient temperature | -20 ... +55 °C |
Material | |
Housing | Plastic, PBT |
Miscellaneous
Notices for UL approval | Operation only with UL Class 2 power supply or equivalent measures |
Tartozékok
Letöltések
Teljes csomag
Minden fontos dokumentum letöltése egyetlen kattintással.
Tartalom:
- A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
- A használati utasítást kiegészítő adatlapok
- A megfelelőségi nyilatkozat












Information de sécurité pour verrous-targettes
Información de seguridad para cerrojos
Sicherheitsinformation für Riegel





















Rendelési adatok
Rend. sz. | 104028 |
Cikk neve | RIEGEL CES-ACR1-AR-C01-AH-SA-104028 |
Súly | 2,184kg |
Global Trade Item Number (GTIN) | 4047048005471 |
Vámtarifaszám | 83014090000 |