KezdőlapProductsTransponder-coded read heads with external evaluationField evaluation unit CES-FDCES-FD-AP-U-01-USI-119865
Field evaluation unit CES-FD-AP-…
- Evaluation of signals in the field
- Connection of CES read heads
- Connection to the ET200s and ET200pro
- Familiar EUCHNER AP interface
- Unicode
Ismertetés
Short circuit monitoring
The switch generates its own clock signal on the output lines FO1A/FO1B. Pay attention to this aspect when connecting to control systems and relays.
Category according to EN ISO 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN ISO 13849-1
Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must always be evaluated.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Connection for control system
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | UB | Power supply, DC 24 V | BN |
| 2 | FO1A | Safety output, channel 1 | WH | |
| 3 | 0V | Ground, DC 0 V | BU | |
| 4 | FO1B | Safety output, channel 2 | BK | |
| 5 | - | n.c. | GY |
Connection for read head
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | H1 | Data line | BN |
| 3 | H2 | Data line | WH | |
| 4 | SH | Shield | - |
Dimension drawings
| 1 | LED status indication |
| 2 | Fastening lug with reinforcement plate |
| 3 | Coding lug |
| 4 | Cable length 1,000 mm |
| 5 | Cable length 200 mm |
Műszaki adatok
Approvals
Work area
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection ratings
| Current consumption | max. 45 mA |
| Fusing | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 75 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB (PELV, see operating instructions) (reverse polarity protected, regulated, residual ripple < 5%) | 24 V DC -15% ... +15% (The device tolerates voltage interruptions in the operating voltage, e.g. test pulses, of up to 5 ms. These voltage interruptions are also output on the safety outputs.) |
| Turn-on time | |
| Safety outputs | max. 400 ms |
| EMC protection requirements | according to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety outputs FO1A / FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Discrepancy time | max. 10 ms |
| Output voltage | |
| HIGH U(FO1A) / U(FO1B) | UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| Switching current | |
| per safety output | 1 ... 150 mA |
| Utilization category | |
| DC-13 | DC-13 24 V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
Mechanical values and environment
| Connection | Connecting cable PUR with plug connector M12, 5-pin; pin 5 not used |
| Degree of protection | IP67 |
| Ready delay | 1 s |
| Material | |
| Housing | Plastic, PBT |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Tightening torque | max. 1 Nm |
| Shock and vibration resistance | according to EN IEC 60947-5-3 |
| Cable ambient temperature (dynamic) | -5 ... +65 °C |
| Cable ambient temperature (static) | -20 ... +65 °C |
Reliability values acc. to EN ISO 13849-1
| Mission time | 20 y |
| Monitoring of the guard position | |
| Category | 4 |
| Performance Level | PL e |
| PFHD | 4.5 x 10-9 |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
In combination with read head CES-A-LMN-SC and actuator CES-A-BMB
| Assured operating distances sao | min. 3.4 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB) |
| Assured release distance sar | max. 10 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB) |
| Operating distance | 5 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB) |
| Switching hysteresis | 0.05 ... 0.2 mm (With read head CES-A-LMN-SC and actuator CES-A-BMB) |
Tartozékok
Connection material
Letöltések
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Instructions
Operating Instructions Field Evaluation Unit CES-FD-AP-… (Unicode/Multicode)
Dok. sz.
Változat
Nyelv
Méret
Operating Instructions Field Evaluation Unit CES-FD-AP-… (Unicode/Multicode)
Dok. sz.
2116267
Változat
06-11/19
Nyelv
Méret
1,1 MB
Operating Instructions Field Evaluation Unit CES-FD-AP-… (Unicode/Multicode)
Dok. sz.
2116267
Változat
06-11/19
Nyelv
Méret
1,1 MB
Betriebsanleitung Feldauswertegerät CES-FD-AP-… (Uni-/Multicode)
Dok. sz.
2116267
Változat
06-11/19
Nyelv
Méret
1,1 MB
Betriebsanleitung Feldauswertegerät CES-FD-AP-… (Uni-/Multicode)
Dok. sz.
2116267
Változat
06-11/19
Nyelv
Méret
1,1 MB
Other Documents
Sales documentation
Ordering data
| Rend. sz. | 119865 |
| Articlename | CES-FD-AP-U-01-USI-119865 |
| Weight | 0,156kg |
| Customsclass | 85365019 |
| ECLASS | 27-27-24-03 Sicherheitsgerichteter Transponderschalter |
