KezdőlapProductsTransponder-coded safety switches with guard lockingCTP-AR safety switch with guard lockingCTP-L1-AR-M-HA-AZS-SAB-157816
Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel
- Safety switch with guard locking and integrated evaluation electronics
- Version with stainless-steel components
- ECOLAB certificate
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4/PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Approach directions A, B and C (delivery state)

Ismertetés
medium-resistant stainless-steel version
robust, tough and largely media resistant. Critical components such as plugs, cover screws and guide bushes, etc., consist of high-quality inox steel.
Multicode evaluation
Every suitable actuator is detected by the switch.
Guard locking type
CTP‑L1 | Guard locking actuated by spring force and power-ON released (closed-circuit current principle). |
Connector assignment
Dimension drawings

1 | Auxiliary release |
2 | Locking screw |
3 | LEDs |
Connection examples

Műszaki adatok
Approvals



Work area
Repeat accuracy R | |
according to EN 60947-5-2 | 10 % |
Electrical connection ratings
Power consumption | 6 W |
Current consumption | |
IIMP | 400 mA |
IUB | 40 mA |
Fusing | |
external (solenoid operating voltage IMP) | 0.5 ... 8 A |
external (operating voltage UB) | 0.25 ... 8 A |
Rated insulation voltage Ui | 50 V |
Rated impulse withstand voltage Uimp | 0.5 kV |
Operating voltage DC | |
UUB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple < 5%, PELV |
EMC protection requirements | according to EN IEC 60947-5-3 |
Utilization category | |
DC-13 | 24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
Solenoid operating voltage DC | |
UIMP | 24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple < 5%, PELV |
Solenoid duty cycle | 100 % |
Risk time according to EN 60947-5-3 | |
Single device | max. 260 ms |
Risk time according to EN 60947-5-3, extension for each additional device | max. 5 ms |
Switching load | |
according to UL | 24V DC, Class 2 (alternatively, see operating instructions) |
Safety class | |
EN IEC 61140 | III |
Test pulses | max. 1.0 ms (Applies to a load with C <= 30 nF and R <= 20 kohm) |
Test pulse interval | min. 140 ms |
Degree of contamination (external, according to EN 60947-1) | 3 |
Monitoring output OD, OI, OL | |
Output type | p-switching, short circuit-proof |
Output voltage | 0.8xUB ... UB V DC |
Switching current | 1 ... 50 mA |
Safety outputs FO1A/FO1B | |
Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
Discrepancy time | |
both safety outputs | max. 10 ms according to EN IEC 60947-5-3 |
Output voltage | |
HIGH U(FO1A) / U(FO1B) | UB-1.5 ... UB V DC |
LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
Turn-on time | max. 400 ms |
Switching current | |
per safety output FO1A / FO1B | 1 ... 150 mA |
Off-state current Ir | max. 0.25 mA |
Mechanical values and environment
Approach speed | max. 20 m/min |
Connection | 2 plug connectors M12, 5- and 8-pin |
Degree of protection | IP67/IP69/IP69K (screwed tight plug connector/mating component) |
Extraction force | 20 N |
Ready delay | 8 s |
Material | |
Metal material | Stainless steel |
Safety switch housing | reinforced thermoplastic |
Actuating force | 10 N |
Mechanical life | 1 x 10⁶ |
Installation orientation | any |
Switching frequency | max. 0.5 Hz |
Overtravel | 5 mm |
Retention force | 20 N |
Shock and vibration resistance | according to EN IEC 60947-5-3 |
Ambient temperature | |
at UB = 24V DC | -20 ... +55 °C |
Locking force Fmax | 3900 N |
Locking force FZh | 3000 N (Fzh = Fmax/1.3, depending on the actuator used) |
Guard locking principle | Closed-circuit current principle |
Reliability values acc. to EN ISO 13849-1
Mission time | 20 y |
Category | 4 |
Performance Level | PL e |
PFHD | 4.1 x 10 -9 |
Miscellaneous
The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Tartozékok
Connection material
Connecting cable with 2 plug connectors M12, 5-pin, 10m

119947
C-M12F05-05X034PU10,0-M12M05-119947
C-M12F05-05X034PU10,0-M12M05-119947
- M12 female plug to M12 plug connector, 5-pin
- Straight female plug and plug connector
- PUR cable
- Cable length 10 m

100181
C-M12F05-05X034PV10,0-M12M05-100181
C-M12F05-05X034PV10,0-M12M05-100181
- M12 female plug to M12 plug connector, 5-pin
- Straight female plug and plug connector
- PVC cable
- Cable length 10 m
Connecting cable with 2 plug connectors M12, 5-pin, 20m

119971
C-M12F05-05X034PU20,0-M12M05-119971
C-M12F05-05X034PU20,0-M12M05-119971
- M12 female plug to M12 plug connector, 5-pin
- Straight female plug and plug connector
- PUR cable
- Cable length 20 m

100182
C-M12F05-05X034PV20,0-M12M05-100182
C-M12F05-05X034PV20,0-M12M05-100182
- M12 female plug to M12 plug connector, 5-pin
- Straight female plug and plug connector
- PVC cable
- Cable length 20 m
Connecting cable with 2 plug connectors M12, 5-pin, 5 m

100180
C-M12F05-05X034PV05,0-M12M05-100180
C-M12F05-05X034PV05,0-M12M05-100180
- M12 female plug to M12 plug connector, 5-pin
- Straight female plug and plug connector
- PVC cable
- Cable length 5 m

119932
C-M12F05-05X034PU05,0-M12M05-119932
C-M12F05-05X034PU05,0-M12M05-119932
- M12 female plug to M12 plug connector, 5-pin
- Straight female plug and plug connector
- PUR cable
- Cable length 5 m
M12 extension PUR, 5-pin, plug connectors at both ends, 10 m

115565
C-M12F05-05X025PU10,0-M12M05-115565
C-M12F05-05X025PU10,0-M12M05-115565
- M12 female plug, 5-pin (angled) to M12 plug connector (straight)
- plug connectors at both ends
- PUR cable
- Cable length 10 m
- with cable exit A (right)

115566
C-M12F05-05X025PU10,0-M12M05-115566
C-M12F05-05X025PU10,0-M12M05-115566
- M12 female plug, 5-pin (angled) to M12 plug connector (straight)
- plug connectors at both ends
- PUR cable
- Cable length 10 m
- with cable exit C (left)
Y-distributor M12 with connecting cable, without IO-Link evaluation

111696
AC-YD-V0,2-SBB-111696
AC-YD-V0,2-SBB-111696
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 0.2 m

112395
AC-YD-V1,0-SBB-112395
AC-YD-V1,0-SBB-112395
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 1 m
Mounting accessories
Efficient protection against tampering for safety switch mounting

161348
AM-C-SW5-V3-161348
AM-C-SW5-V3-161348
- Plastic inserts for hexagon socket screws a/f 5
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws

161344
AM-C-SW4-V3-161344
AM-C-SW4-V3-161344
- Plastic inserts for hexagon socket screws a/f 4
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
Letöltések
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret

EU-Konformitätserklärung
Dok. sz.
EDC2123042
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret

UKCA-Konformitätserklärung
Dok. sz.
EDC20001501
Változat
Nyelv
Méret
0,1 MB
Instructions
Operating instructions Transponder-Coded Safety Switch With Guard Locking CTP-AR Unicode/Multicode
Dok. sz.
Változat
Nyelv
Méret

Operating instructions Transponder-Coded Safety Switch With Guard Locking CTP-AR Unicode/Multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,7 MB

Mode d'emploi Interrupteur de sécurité à codage par transpondeur avec interverrouillage CTP-AR uni-/multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,7 MB

Manual de instrucciones Interruptor de seguridad con codificación por transponder con bloqueo CTP-AR Unicode/Multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,7 MB

Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung CTP-AR Uni-/Multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,7 MB

Istruzioni di impiego Finecorsa di sicurezza con codifica a transponder con meccanismo di ritenuta CTP-AR Uni-/Multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,7 MB

操作指示書トランスポンダー型コード化安全スイッチ ガードロック内蔵CTP-AR ユニコード/マルチコード
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,9 MB

사용 설명서 트랜스폰더 코딩형 안전 스위치 가드 잠금 기능 있음 CTP-AR 유니코드/멀티코드
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
5,1 MB

Návod k použití Bezpečnostní spínač s kódovaným transpondérem CTP-AR Unicode/Multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,9 MB

Instrukcja obsługi Wyłącznik bezpieczeństwa kodowany transponderowo z blokadą CTP-AR Unicode/Multicode
Dok. sz.
2123041
Változat
08-01/21
Nyelv
Méret
4,9 MB
Other Documents
Approvals and certificates
IC
Dok. sz.
Változat
Nyelv
Méret

IC
Dok. sz.
Változat
Nyelv
Méret
1,8 MB
Sales documentation
UQS document
Dok. sz.
Változat
Nyelv
Méret

Dok. sz.
Változat
Nyelv
Méret
1,9 MB
Ordering data
Rend. sz. | 157816 |
Articlename | CTP-L1-AR-M-HA-AZS-SAB-157816 |
Weight | 0,6kg |
Customsclass | 85365019 |