KezdőlapProductsTransponder-coded safety switches without guard lockingCES-AR safety switchCES-I-AR-M-C14-U20-162596

CES-I-AR-M-C14-U20-162596 (Rend. sz. 162596)

Safety switch CES-I-AR-.-C14-..., RFID, connection cable, connecting cable PUR with cable end sleeves

  • Multicode
  • Monitoring output door position OD
  • Connection cable, connecting cable PUR, 20 m, cable end sleeves
CES-I-AR-M-C14-U20-162596 (Rend. sz. 162596)

Ismertetés

Approach direction and installation position

Permissible installation position

Typical operating distance

(Only in conjunction with actuator CES-A-BBN)

To avoid entering the actuating range of the side lobes, a minimum distance of s = 10 mm must be maintained between the actuator and the safety switch when the approach direction is to the side.

Attention:

The actuating range may vary depending on the actuator, substrate material and installation situation. Further actuating ranges can be found in the operating instructions.

Multicode evaluation

The system checks whether the actuator type is one that can be recognized by the system (multicode evaluation). The system has a low coding level. Every suitable actuator is recognized by the switch.

Safety characteristics

Thanks to two redundant safety outputs (semiconductor outputs) with internal monitoring, the device is suitable for:

  • Category 4 /PL e according to EN 13849-1
  • SIL 3 according to EN IEC 62061 Table 4

The OSSD outputs used check their function for short circuits and short circuits with test pulses.

LED indicator

STATE

Status LED

DIA

Diagnostics LED

Terminal assignment

DesignationFunctionConnecting cable conductor coloring
FI1BEnable input for channel 2WH
UBPower supply, DC 24 VBN
FO1ASafety output, channel 1GN
FO1BSafety output, channel 2YE
ODMonitoring outputGY
FI1AEnable input for channel 1PK
0 VGround, DC 0 VBU
RSTReset inputRD

Accessories required

Actuator is not included.

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings
1Active face
2LED status indication
3Cable end sleeve on cable end

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20c_UL_us_E346349_1/1ECOLAB__CES C14

Workspace

Repeat accuracy R
according to EN 60947-5-2 10 %

Electrical connection values

Fuse
external (operating voltage) 0.25 ... 8 A
Rated insulation voltage Ui 30 V
Rated impulse voltage Uimp 0.5 kV
Operating voltage DC
UB 24 V DC -15% ... +15% regulated, residual ripple<5%, PELV
Turn-on time
Safety outputs max. 400 ms
EMC protection requirements Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3 max. 260 ms
Risk time according to EN 60947-5-3, extension for each additional device max. 5 ms
Safety class III
Current consumption max. 35 mA (without taking into account the load currents on the monitoring output and the safety outputs)
Degree of contamination (external, according to EN 60947-1) 3
Monitoring output OD
Output type Semiconductor output, p-switching, short circuit-proof
Output voltage 0.8 x UB ... UB V DC
Switching current max. 50 mA
Safety outputs FO1A/FO1B
Output type 2 semiconductor outputs, p-switching, short circuit-proof
Output voltage
HIGH U (FO1A) / U (FO1B) UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
LOW U (FO1A) / U (FO1B) 0 ... 1 V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
rated conditional short-circuit current 100 A
Discrepancy time max. 10 ms
Utilization category
DC-13 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current Ir max. 0.25 mA
Switching current
per safety output 1 ... 200 mA
Test pulse duration max. 1.0 ms (Applies to a load with C<= 30nF and R<= 20kOhm)
Test pulse interval min. 140 ms

Mechanical values and environment

Connection type Connecting cable PUR, length 20 m
Tightening torque
Fixing screws 2 Nm
Ready delay 10 s
Dynamic bending radius 10 x cable diameter
Static bending radius 5 x cable diameter
Installation orientation any
Switching frequency max. 1 Hz
Mounting distance
between switches min. 80 mm
Mounting type Surface mounting on metal
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP65/IP67/IP69/IP69K
Ambient temperature
at UB = 24 V DC 0 ... 65 °C
Material
Housing 2-component epoxy resin

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

PLMaximum SILPFHDCategoryMission time
Monitoring of the guard positionPL e-4.1x10-9420 y


In combination with actuator CES-A-BBN-C14-160441

Switch-on distance
in z direction / installation position A max. 20 mm
in z direction / installation position D max. 15 mm
Secured switch-off distance sar
in y direction / installation position A max. 72 mm
in y direction / installation position D max. 68 mm
in x/z direction / installation position A max. 64 mm
in x/z direction / installation position D max. 60 mm
Secured switching distance sao
in z direction / installation position D max. 5 mm
in z direction / installation position A max. 10 mm

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 7,3 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 162596
Cikk neve CES-I-AR-M-C14-U20-162596
Súly 0,073kg
Vámtarifaszám 85365019000
ECLASS 27-27-24-03 Safety-related transponder switch