EKS-A-IPLA-G01-ST05/04-OS7 (Rend. sz. 165385)

Electronic-Key adapter EKS Light FSA compact (supports all operating states)

  • Electronic-Key adapter with 4-bit parallel interface
  • Simple connection
  • Read-only system
  • Electronic-Key adapter and evaluation electronics in one housing
  • Reliable retention of the Electronic-Key, even if there is heavy vibration
  • Internal evaluation of the data from the Electronic-Key
  • DIP switches are preset (see Figure)
  • Output of the access level via 4-bit parallel interface
  • Has all operating states
  • Connection to PLC
  • Version FSA (For Safety Applications)
EKS-A-IPLA-G01-ST05/04-OS7 (Rend. sz. 165385)

Ismertetés

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples

Connection examples

Connection examples

Műszaki adatok

Approvals

EAC_RU C-DE.MO05.B.00971/20c_UL_us_E240367_X1/A1c_UL_us_E240367_X1/A1

Operating and display elements

LED display
green Ready (in operation)
yellow Electronic-Key active 1) (1) The LED illuminates yellow if there is a functional Electronic-Key in the Electronic-Key adapter.)
red Error

Electrical connection values

Connection cross section 0.14 ... 1.5 mm²
Parameters for floating semiconductor switching contact LA
Output voltage U x 0.9 ... U V DC ((UA (LA) in the switched state))
Operating voltage
DC 9 ... 28 V (UB (regulated, residual ripple<5%))
Utilization category
AC-15 24V 50mA
AC-12 24V 50mA
DC-12 24V 50mA
DC-13 24V 50mA
Capacitive load max. 1 µF
Switching voltage 0 ... 24 ... 30 V (for load (LA))
Switching current 1 ... 10 ... 50 mA ((with overload protection))
Current consumption max. 70 mA (IB (without load current))
Resistance 0.035 kΩ
Interface, digital outputs
Output voltage UB-2 ... UB V DC ((UA (HIGH level) for A, B, C, D, strobe))
Output current 1 ... 10 ... 50 mA

Mechanical values and environment

Connection type plug-in connection terminals, 4-pin, with screw terminal (incl. semiconductor switching contact LA)
Installation orientation on the front
Storage temperature -25 ... 70 °C
Mounting cut-out 33 x 68 mm
Degree of protection
in mounted condition (only access side) IP65/IP67
Ambient temperature -20 ... 70 °C
Material
Housing Plastic (PA6-GF30, black)
Interface, digital outputs
Connection type plug-in connection terminals, 5-pin, with screw terminal
Cable length 50 m ((to the control system))

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Reliability values according to EN ISO 13849-1 ²
Diagnostic Coverage (DC) 92 %
Category 3
MTTFD 200

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

MTTFDλDMTTFMTBFRDFMission time
Safe key detection200 y20 y
Important! Maximum category 3 and DC 92 % achievable due to the internal device design.


Interface

Interface, digital outputs
Interface 4-bit parallel plus strobe, binary coded via High/Low level (to inputs of control system or switchgear)

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 5,3 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 165385
Cikk neve EKS-A-IPLA-G01-ST05/04-OS7
Súly 0,18kg
Vámtarifaszám 85364900
ECLASS 27-39-90-90 Property, access monitor (other, unspecified)