CES-IA-BP-M-C07-SI-167007 (Rend. sz. 167007)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Complete set comprising non-contact safety switch CES-C07, with actuator

Safety switch with integrated evaluation electronics
Actuator included
Suitable for separate operation (no series connection)
Multicode
M12 plug connector, 5-pin (pin 5 not used)
Direct connection to IP67 field modules
2 safety outputs (semiconductor outputs)
Short circuit monitoring
Category 4 / PL e according to EN ISO 13849-1
Three active faces

CES-IA-BP-M-C07-SI-167007 (Rend. sz. 167007)

Ismertetés

Installation position

Permissible installation position

Multicode evaluation

Every suitable actuator is detected by the switch.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

Category 4/PL e according to EN 13849-1

Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Terminal assignment

Pin	Designation	Function
1	UB	Power supply, DC 24 V
2	FO1A	Safety output, channel A
3	0 V	Ground, DC 0 V
4	FO1B	Safety output, channel B
5	-	n.c.

Notice

The caps for the mounting holes are included.

CES-C07: Transponder-coded safety switch

Dimensional drawings

1	LEDs
2	Active face
3	With the installation orientation shown: cable outlet on left or right

Connection examples

Műszaki adatok

Approvals

TUEV Süd München_Z10 040393 0031 Rev. 02

Mechanical values and environment

Storage temperature	-25 ... 70 °C

Storage temperature

-25 ... 70 °C

Switch CES-I-BP-M-C07-SI-162813 (Order no. 162813)

Workspace

Repeat accuracy R	10 %

Repeat accuracy R

10 %

Electrical connection values

Fuse
external (operating voltage)	0.25 ... 8 A
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	75 V
Rated impulse voltage U_imp	1.5 kV
Operating voltage DC
U_B	24 V DC -15% ... +15% regulated, residual ripple<5%, PELV
Turn-on time
Safety outputs	max. 100 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 125 ms
Safety class	III
Current consumption	40 mA
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD/C
Output type	p-switching, short circuit-proof
Output voltage	UB-1.5 ... UB V DC
Switching current	1 ... 50 mA
	Safety outputs FO1A/FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
HIGH U(FO1A) / U(FO1B)	UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.)
Discrepancy time	max. 10 ms
Utilization category
DC-13	24V 150mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.)
Off-state current Ir	max. 0.25 mA
Switching current	1 ... 150 mA
Test pulse duration	0.3 ms (Applies to a load with C<= 30nF and R<= 20kOhm)
Test pulse interval	ca 100 ms

Mechanical values and environment

Dimensions	40 x 26.5 x 18
Connection type	M12 plug connector, 5-pin
Tightening torque	max. 0.8 Nm
Ready delay	1.3 s
Operating altitude	max. 4 000 m
Installation orientation	any
Switching frequency	max. 1 Hz
Storage temperature	-25 ... 70 °C
Mounting distance
between switches	min. 50 mm
Mounting type	Surface mounting on metal
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature
at U_B = 24 V DC	-25 ... 55 °C (+65 °C at I_L = max. 10 mA per safety output)
Material
Housing	Plastic, PBT-PC-GF30

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	3	6x10^-10	4	20 y

Miscellaneous

Notices for UL approval	Operation only with UL Class 2 power supply or equivalent measures
Additional feature	Caps included

Actuator CES-A-BTN-C07-156230 (Order no. 156230)

Electrical connection values

Power supply	Inductive via read head

Power supply

Inductive via read head

Mechanical values and environment

Dimensions	40 x 26.5 x 18
Tightening torque
Fixing screws	max. 0.8 Nm
Storage temperature	-40 ... 70 °C
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature	-40 ... 65 °C
Material
Housing	Plastic PBT-PC-GF30

Components included in the set

Included accessories	2x safety screws M4x20

Included accessories

2x safety screws M4x20

Komponensek

162813
CES-I-BP-M-C07-SI-162813
Safety switch CES-I-BP-.-C07-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems

Multicode
M12 plug connector(s), 5-pin, pin 5 not assigned
for connection to decentralized peripheral systems

156230
CES-A-BTN-C07-156230
Actuator CES-A-BTN-C07

Cube-shaped design, 40 x 26.5 x 18 mm
2x safety screws M4x20 included

Tartozékok

Metal bolt

Bolt for safety switch CES-C07

168155
BTM-CES07-S-TH-20-X-168155

Bolt for switch CES-C07
Steel bolt
For doors hinged on the left or right
Ball detent mechanism in closed position
Suitable for door gap of approx. 7 mm
Protective plate for safety switch

Bolt with escape release, for safety switch CES-C07

168189
BTM-CES07-S-TH-21-F-168189

Bolt for switch CES-C07
Steel bolt
For doors hinged on the left or right
Bolt with escape lever
With detent knob in open position
Ball detent mechanism in closed position
Suitable for a door gap of approx. 7 mm
Protective plate for safety switch

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat

Teljes csomag letöltése (ZIP, 5,5 MB)