CET-L1AH-AP-U-167423 (Rend. sz. 167423)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

Műszaki adatok

Storage temperature	-25 ... 70 °C

Storage temperature

-25 ... 70 °C

Power supply	Inductive via read head

Power supply

Inductive via read head

Approach direction	Any
Storage temperature	-25 ... 70 °C
Mechanical life	2 x 10⁶
Degree of protection	IP67 (Degree of protection of the transponder)
Ambient temperature	-20 ... 55 °C
Material	stainless steel
Locking force F_max	6500 N
Locking force F_Zh	5000 N

Approach direction	A or C
Number of safety switches that can be mounted	1
Escape release	None
Storage temperature	-25 ... 70 °C
Material
Handle	Plastic
Switch bracket	Steel powder-coated
Guide strips	Plastic
Base plate	Galvanized steel

Detent mechanism	None

Detent mechanism

None

Repeat accuracy R
according to EN 60947-5-2	10 %

Fuse
external (operating voltage U_B)	0.25 ... 8 A
external (solenoid operating voltage U_CM)	0.5 ... 8 A
Power consumption
Solenoid	11 W
Connecting cable	30V DC, 2A (for UL requirement UL category code (CYJV/CYJV7))
Operating voltage DC
LED	24 V DC -15% V DC ... +10% V DC
U_B	24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV
EMC protection requirements	Acc. to EN IEC 60947-5-3
Utilization category
DC-13	24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Solenoid operating voltage DC
U_CM	24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV
Solenoid duty cycle	100 %
Risk time according to EN 60947-5-3	max. 400 ms
Switching load
according to UL	24V DC, Class 2 (For alternatives, see operating instructions)
Safety class	III
Current consumption
I_B	80 mA
I_CM	450 mA
Test pulse duration	max. 0.3 ms (Applies to a load with C<= 30nF and R<= 20kOhm)
Degree of contamination (external, according to EN 60947-1)	3

Anfahrgeschwindigkeit	max. 20 m/min
Connection type	2 plug connector M12, 5-pin
Ready delay	1 s
Installation orientation	any
Switching frequency	max. 0.5 Hz
Degree of freedom X	±5 mm
Degree of freedom Y	±5 mm
Degree of freedom Z	±4 mm
Storage temperature	-25 ... 70 °C
Mechanical life	2 x 10⁶
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP67 (In the inserted and screwed tight state)
Ambient temperature
at U_B = 24 V DC	-20 ... 55 °C
Material
Safety switch housing	Die-cast aluminum
Ramp	Stainless steel
Locking force F_max	6500 N
Locking force F_Zh	5000 N
Guard locking principle	Closed-circuit current principle

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of guard locking	PL e	-	3.1x10^-9	4	20 y

	PL	Maximum SIL	Category	Mission time
Control of guard locking	Depending on external control of guard locking			20 y

Notices for UL approval	Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Notices for UL approval

Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

096327
CET-A-BWK-50X
Actuator CET-A-BWK-50X

104309
RIEGEL CET-A-C
Bolt for safety switch CET

111346
CET3-AP-CRA-AH-50X-SI-111346
Safety switch with guard locking CET-AP-..., RFID, plug connector(s) M12, for connection to decentralized peripheral systems

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
A használati utasítást kiegészítő adatlapok
A megfelelőségi nyilatkozat