HomeProductsSafety engineering with AS‑InterfaceElectromechanical safety switches with AS-InterfaceNZ2VZ-538ESEM4AS1
Safety switch NZ.VZ ASi
- Housing according to EN 50041
- Plug connector M12
- LED indicator
Description
AS-Interface inputs
D0, D1 | Positively driven contact 1 |
D2, D3 | Positively driven contact 2 |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D1 | LED red |
D2 | LED green |
LED function display
- The Power LED indicates the operating voltage on the bus.
- The Fault LED indicates if a fault has been detected on the AS-Interface bus.
- The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.
Dimensional drawings
1 | Do not use as an end stop. Limit overtravel separately. |
2 | Actuating direction can be changed |
3 | Standard |
4 | Plug coding not adjustable. Only suitable for straight plug connectors. |
a | Travel without operation: actuator is in the guide slot, but function is not triggered. |
b | Switching operation completed: actuator must be inserted to this point to ensure safe switching. The actuator must be withdrawn at least to point a for switching off. |
Connection examples
View of connection side |
Technical data
Approvals
Electrical connection values
ASI operating current | max. 45 mA |
ASI data in | |
according to AS-i Safety at Work | D0, D1, D2, D3 (see positively driven contact) |
ASI data out | |
LED green | D2 (1 = LED on) |
LED red | D1 (1 = LED on) |
ASI-LED | |
LED red | Fault (Offline phase or address 0) |
LED green | Power (ASI voltage present) |
ASI slave type | |
according to ASI specification 2.1 | ID code: B |
according to ASI specification 2.1 | EA code: 7 |
ASI voltage | 22.5 ... 30 ... 31.6 V |
Mechanical values and environment
Approach speed | max. 20 m/min |
Approach direction | |
Actuating head left | A |
Connection type | |
1 x | Plug connector M12 (4-pin) |
Number of door position positively driven contacts | |
according to AS-i Safety at Work | 2 (D0,D1,D2,D3 / 1 = door closed) |
Extraction force | 35 N |
Actuation frequency | max. 1200 1/h |
Actuating force | 35 N |
Installation orientation | any |
Insertion depth | 52 mm |
Mechanical life | 2 x 10⁶ |
Retention force | 8 N |
Switching principle | Slow-action switching contact |
Degree of protection | IP67 |
Ambient temperature | -20 ... +55 °C |
Material | |
Contact | Silver alloy, gold flashed |
Housing | Anodized die-cast alloy |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
B10D | Mission time | |
---|---|---|
Monitoring of the guard position | 4.5x106 | 20 y |
Important! Values valid at DC-13 100 mA/24V |
In combination with actuator ACTUATOR-Z-G
Overtravel | 4 mm |
In combination with actuator ACTUATOR-Z-GN
Overtravel | 16 mm |
Accessories
Actuator
Actuator for safety switches NZ.VZ, NZ.VZ.VS and TZ
016849
BETAETIGER-Z-G
BETAETIGER-Z-G
- Two stainless-steel safety screws per actuator
074411
BETAETIGER-Z-G/V25
BETAETIGER-Z-G/V25
- Two stainless-steel safety screws per actuator
- Packaging unit 25 pieces
072251
BETAETIGER-Z-GN
BETAETIGER-Z-GN
- Two stainless-steel safety screws per actuator
097436
BETAETIGER-Z-GME
BETAETIGER-Z-GME
- Made of solid stainless steel
- Two stainless-steel safety screws per actuator
Bolt
Bolt NZ-A... for safety switches NZ.VZ and NZ.VZ.VS
078455
RIEGEL NZ-AR2
RIEGEL NZ-AR2
- Steel bolt
- For doors hinged on the right
- Detent knob in open position
- Detent knob mechanism in closed position
- Can be locked in open position with padlocks
- Actuator and switch bracket included
083890
RIEGEL NZ-AB
RIEGEL NZ-AB
- Steel bolt
- For doors hinged on the right
- Ball detent mechanism in closed position
- Can be locked in open position with padlocks
- Actuator and switch bracket included
Bolt NZ-C... for safety switches NZ.VZ and NZ.VZ.VS
078456
RIEGEL NZ-CR2
RIEGEL NZ-CR2
- Steel bolt
- For doors hinged on the left
- Detent knob in open position
- Detent knob mechanism in closed position
- Can be locked in open position with padlocks
- Actuator and switch bracket included
083892
RIEGEL NZ-CB
RIEGEL NZ-CB
- Steel bolt
- For doors hinged on the left
- Ball detent mechanism in closed position
- Can be locked in open position with padlocks
- Actuator and switch bracket included
Bolt for safety switch NZ.VZ, NZ.VZ.VS and TZ with escape release
079785
RIEGEL NZ/TZ-S1/CF
RIEGEL NZ/TZ-S1/CF
- Aluminum bolt
- For doors hinged on the left
- Bolt with escape lever
- Spring catch in open position
- Suitable for a door gap of approx. 5 mm
079786
RIEGEL NZ/TZ-S1/AF
RIEGEL NZ/TZ-S1/AF
- Aluminum bolt
- For doors hinged on the right
- Bolt with escape lever
- Spring catch in open position
- Suitable for a door gap of approx. 5 mm
Bolts NZ/TZ-S1 and NZ/TZ-S2 for safety switches NZ.VZ, NZ.VZ.VS and TZ
028357
RIEGEL NZ/TZ-S1
RIEGEL NZ/TZ-S1
- Aluminum bolt
- For doors hinged on the left or right. Cone grip bottom.
- Spring catch in open position
- Can be locked in open position with padlocks
- Actuator included
028359
RIEGEL NZ/TZ-S2
RIEGEL NZ/TZ-S2
- Aluminum bolt
- For doors hinged on the left or right. Cone grip top.
- Spring catch in open position
- Can be locked in open position with padlocks
- Actuator included
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU declaration of conformity
Doc. no.
Version
Language
Size
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Doc. no.
EDC2539628
Version
Language
Size
0,2 MB
EU declaration of conformity
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Déclaration UE de conformité
Declaración de conformidad UE
EU-Konformitätserklärung
Dichiarazione UE di conformità
Doc. no.
EDC2539628
Version
Language
Size
0,2 MB
UKCA-Konformitätserklärung
Doc. no.
Version
Language
Size
UKCA-Konformitätserklärung
Doc. no.
EDC20001551
Version
Language
Size
0,1 MB
Instructions
Operating Instructions Safety Switch NZ.VZ…AS
Doc. no.
Version
Language
Size
Operating Instructions Safety Switch NZ.VZ…AS
Betriebsanleitung Sicherheitsschalter NZ.VZ…AS
Betriebsanleitung Sicherheitsschalter NZ.VZ…AS
Doc. no.
2090766
Version
07-03/23
Language
Size
0,8 MB
Betriebsanleitung Sicherheitsschalter NZ.VZ…AS
Doc. no.
2090766
Version
07-03/23
Language
Size
0,4 MB
Инструкция по эксплуатации Предохранительный выключатель NZ.VZ…AS
Doc. no.
2090766
Version
07-03/23
Language
Size
0,9 MB
Instrukcja obsługi Wyłącznik bezpieczeństwa NZ.VZ…AS
Doc. no.
2090766
Version
07-03/23
Language
Size
0,9 MB
Other Documents
Approvals and certificates
Asi Interface
Doc. no.
Version
Language
Size
Asi Interface
Doc. no.
Version
Language
Size
0,1 MB
DNV-GL
Doc. no.
Version
Language
Size
DNV-GL
Doc. no.
Version
Language
Size
0,2 MB
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,3 MB
Sales documents
Interrupteurs de sécurité avec AS-Interface
Doc. no.
Version
Language
Size
Interrupteurs de sécurité avec AS-Interface
Doc. no.
112564
Version
12-03/21
Language
Size
4,9 MB
CAD data
Ordering data
Ordernumber | 090742 |
Item designation | NZ2VZ-538ESEM4AS1 |
Gross weight | 0,36kg |
Customs tariff number | 85365019000 |
ECLASS | 27-27-26-02 Safety switch with separate actuator (Type 2) |