KezdőlapProductsTransponder-coded safety switches with guard lockingCTP-AS safety switch with guard lockingCTP-L1-AS1B-U-HA-AZ-SJ-124987
Safety switch CTP-L1-AS – with AS-i connection, plug connector M12 (closed-circuit current principle)
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 3900 N
- Category 4/PL e according to EN ISO 13849-1
- Unicode
- Approach directions A, B and C (delivery state)

Ismertetés
Guard locking type
CTP‑L1 | Guard locking actuated by spring force and power-ON released (closed-circuit current principle). |
Control of the guard locking solenoid
The guard locking solenoid can be controlled via AS-Interface bus bit D0 or via the auxiliary power.
AS-Interface inputs
D0, D1 | Door monitoring |
D2, D3 | Guard lock monitoring |
Evaluation is performed via a safety monitor.
AS-Interface outputs
D0 | Guard locking |
LED function display
- The ASI LED indicates the state of the ASi bus.
- The STATE LED indicates the state of the switch.
- The LOCK/DIA LED indicates if the door is locked and whether a fault has been detected in the switch.
Dimension drawings

1 | Auxiliary release |
2 | Locking screw |
3 | LEDs |
4 | Plug connector not aligned |
Connection examples

View of plug side |
Connection examples

Műszaki adatok
Approvals




Work area
Repeat accuracy R | |
according to EN 60947-5-2 | 10 % |
Electrical connection ratings
ASI data in | |
according to AS-i Safety at Work | D0 (Door position) |
according to AS-i Safety at Work | D1 (Door position) |
according to AS-i Safety at Work | D2 (Guard locking) |
according to AS-i Safety at Work | D3 (Guard locking) |
ASI data out | |
Guard locking solenoid | D0 (1 = Solenoid energized) |
ASI slave type | |
according to ASI specification 3.0 | EA code: 7 |
according to ASI specification 3.0 | ID code: B |
ASI operating current | 50 mA |
ASI auxiliary voltage | |
IEC 60742, PELV | 24 V -15% ... +10% |
ASI auxiliary current | 400 mA |
ASI voltage | 26.5 ... 30 ... 31.6 V |
Safety class | |
EN IEC 61140 | III |
Mechanical values and environment
Approach speed | max. 20 m/min |
Connection | 1 plug connector M12, 4-pin |
Degree of protection | IP67/IP69/IP69K (screwed tight plug connector/mating component) |
Extraction force | 20 N |
Ready delay | max. 1 s |
Material | |
Safety switch housing | reinforced thermoplastic |
Actuating force | 10 N |
Mechanical life | 1 x 10⁶ |
Installation orientation | any |
Switching frequency | max. 0.5 Hz |
Overtravel | 5 mm |
Retention force | 20 N |
Shock and vibration resistance | according to EN IEC 60947-5-3 |
Ambient temperature | -20 ... +55 °C |
Locking force Fmax | 3900 N |
Locking force FZh | 3000 N (Fzh = Fmax/1.3, depending on the actuator used) |
Guard locking principle | Closed-circuit current principle |
Reliability values acc. to EN ISO 13849-1
Mission time | 20 y |
Category | 4 |
Performance Level | PL e |
PFHD | 4.3 x 10 -9 |
Miscellaneous
The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
Tartozékok
Actuator
Hinged actuator for safety switch CTP/CTA

122672
A-C-H-RR-LS-122672
A-C-H-RR-LS-122672
- Hinged actuator for doors hinged on the right
- Two safety screws included

122676
A-C-H-RU-LS-122676
A-C-H-RU-LS-122676
- Hinged actuator for bottom-hinged doors
- Two safety screws included

122675
A-C-H-RO-LS-122675
A-C-H-RO-LS-122675
- Hinged actuator for top-hinged doors
- Two safety screws included

122671
A-C-H-RL-LS-122671
A-C-H-RL-LS-122671
- Hinged actuator for doors hinged on the left
- Two safety screws included
Function expansion
Lock for auxiliary release for safety switch CTP/CTA/TP/STP

121917
AE-K-A1-ILK1-121917
AE-K-A1-ILK1-121917
- Identical locking
- Key removable in “locked” position

086236
AE-K-A1-IULK1-86236
AE-K-A1-IULK1-86236
- Identical locking
- Key removable in “unlocked” and “locked” positions

084177
AE-K-A1-DULK1-84177
AE-K-A1-DULK1-84177
- Lock unique locking
- Key removable in “unlocked” and “locked” positions

109212
AE-K-A1-IUK2-109212
AE-K-A1-IUK2-109212
- Identical locking
- Key can be removed only in “unlocked” position
Wire front release (bowden)

124770
AE-B-A1-06,0-F-124770
AE-B-A1-06,0-F-124770
- Can be used as escape release or emergency release
- automatic return
- Rope length 6 m (without sheath)

096230
AE-B-A1-02,0-096230
AE-B-A1-02,0-096230
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 2 m (rope length 6 m)

111233
AE-B-A1-03,0-F-111233
AE-B-A1-03,0-F-111233
- Can be used as escape release or emergency release
- automatic return
- Sheath length 3 m (rope length 6 m)

098314
AE-B-A1-04,0-098314
AE-B-A1-04,0-098314
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 4 m (rope length 6 m)

098313
AE-B-A1-03,0-098313
AE-B-A1-03,0-098313
- Can be used as escape release or emergency release
- no automatic return
- Sheath length 3 m (rope length 6 m)

097747
AE-B-A1-02,0-F-097747
AE-B-A1-02,0-F-097747
- Can be used as escape release or emergency release
- automatic return
- Sheath length 2 m (rope length 6 m)

125582
AE-B-A1-06,0-125582
AE-B-A1-06,0-125582
- Can be used as escape release or emergency release
- no automatic return
- Rope length 6 m (without sheath)
Metal bolt
Bolt for safety switch CTP, CTA

123653
RIEGEL CTP-AC-123653
RIEGEL CTP-AC-123653
- Steel bolt
- For doors hinged on the right and left
- Can be locked in open position with padlocks
- Actuator included

137354
RIEGEL CTP-AC-C2308-137354
RIEGEL CTP-AC-C2308-137354
- Steel bolt
- For doors hinged on the right and left
- Can be locked in open position with padlocks
- Actuator included
- Bolt without door stop, suitable for swing doors
Mounting accessories
Efficient protection against tampering for safety switch mounting

161348
AM-C-SW5-V3-161348
AM-C-SW5-V3-161348
- Plastic inserts for hexagon socket screws a/f 5
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws

161344
AM-C-SW4-V3-161344
AM-C-SW4-V3-161344
- Plastic inserts for hexagon socket screws a/f 4
- Efficient protection against tampering for safety switch mounting
- The packaging includes inserts for 18 screws
Letöltések
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret

EU-Konformitätserklärung
Dok. sz.
EDC2123042
Változat
Nyelv
Méret
0,2 MB
UKCA-Konformitätserklärung
Dok. sz.
Változat
Nyelv
Méret

UKCA-Konformitätserklärung
Dok. sz.
EDC20001501
Változat
Nyelv
Méret
0,1 MB
Instructions
Operating Instructions Transponder-Coded Safety Switch with Guard Locking CTP-L.-AS Unicode/Multicode
Dok. sz.
Változat
Nyelv
Méret

Operating Instructions Transponder-Coded Safety Switch with Guard Locking CTP-L.-AS Unicode/Multicode
Dok. sz.
2124662
Változat
06-01/2022
Nyelv
Méret
3,1 MB

Betriebsanleitung Transpondercodierter Sicherheitsschalter mit Zuhaltung CTP-L.-AS Uni-/Multicode
Dok. sz.
2124662
Változat
06-01/2022
Nyelv
Méret
3,1 MB
Other Documents
Approvals and certificates
Asi Interface
Dok. sz.
Változat
Nyelv
Méret

Asi Interface
Dok. sz.
Változat
Nyelv
Méret
0,4 MB
DGUV
Dok. sz.
Változat
Nyelv
Méret

DGUV
Dok. sz.
Változat
Nyelv
Méret
2,4 MB
Sales documentation
Interrupteurs de sécurité avec AS-Interface
Dok. sz.
Változat
Nyelv
Méret

Interrupteurs de sécurité avec AS-Interface
Dok. sz.
112564
Változat
12-03/21
Nyelv
Méret
4,9 MB
Safety Switches with AS-Interface
Dok. sz.
Változat
Nyelv
Méret

Safety Switches with AS-Interface
Dok. sz.
092332
Változat
12-03/21
Nyelv
Méret
4,9 MB
Sicherheitsschalter mit AS-Interface
Dok. sz.
Változat
Nyelv
Méret

Sicherheitsschalter mit AS-Interface
Dok. sz.
092164
Változat
12-03/21
Nyelv
Méret
4,9 MB
transponder-coded safety switch CTP with guard locking
Dok. sz.
Változat
Nyelv
Méret

transponder-coded safety switch CTP with guard locking
Dok. sz.
123244
Változat
12-02/18
Nyelv
Méret
2,3 MB

Interrupteur de sécurité à codage par transpondeur CTP avec interverrouillage
Dok. sz.
123245
Változat
12-02/18
Nyelv
Méret
2,3 MB

Interruptor de seguridad CTP codifi cado por transponder con bloqueo
Dok. sz.
123246
Változat
12-02/18
Nyelv
Méret
2,3 MB

Transpondercodierter Sicherheitsschalter CTP mit Zuhaltung
Dok. sz.
123243
Változat
12-02/18
Nyelv
Méret
2,3 MB

Info sheets
Fiches info
Ficha informativa
Fichas de informação
信息表
情報シート
정보 시트
Informační listy
Fiches info
Ficha informativa
Fichas de informação
信息表
情報シート
정보 시트
Informační listy
Dok. sz.
126214
Változat
12-02/18
Nyelv
Méret
2,3 MB

Finecorsa di sicurezza con codifi ca a transponder CTP con meccanismo di ritenuta
Dok. sz.
126042
Változat
12-02/18
Nyelv
Méret
2,3 MB

Info sheets
Fiches info
Ficha informativa
Fichas de informação
信息表
情報シート
정보 시트
Informační listy
Fiches info
Ficha informativa
Fichas de informação
信息表
情報シート
정보 시트
Informační listy
Dok. sz.
158439
Változat
12-02/18
Nyelv
Méret
2,4 MB

ガード・ロック付き トランスポンダー・ コード化 安全スイッ チCTP
Dok. sz.
136411
Változat
12-02/18
Nyelv
Méret
4,3 MB

Bezpecnostní spínac CTP s kódovaným transpondérem a jištením ochranného krytu
Dok. sz.
126604
Változat
12-02/18
Nyelv
Méret
2,3 MB

Kodowany RFID - wyłącznik bezpieczeństwa CTP z ryglowaniem
Dok. sz.
160884
Változat
12-02/18
Nyelv
Méret
2,2 MB

Kilitli RFID kodlu emniyet salteri CTP
Dok. sz.
126076
Változat
12-02/18
Nyelv
Méret
2,3 MB
Ordering data
Rend. sz. | 124987 |
Articlename | CTP-L1-AS1B-U-HA-AZ-SJ-124987 |
Weight | 0,574kg |
Customsclass | 85365019 |